NF P20-518-1984 Methods of testing doors Test for the change in stiffness of the door leaves by repeated torsion 《门的检验方法 通过反复扭转检验门扇硬挺度变化》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 28148-1992 PTFE envelope gaskets for glass lined agitator vessels《搪瓷钢制搅拌容器的聚四氟乙烯外壳密封》.pdf

DIN 28150-1992 Divided lapped flange for glass lined welding necks PN 10《搪瓷的对焊法兰的组合搭接法兰 公称压力（PN）10》.pdf

DIN 28151-1999 Nozzles of jacket on agitated vessels of glass lined steel - Position of nozzles《钢制搪玻璃搅拌容器用套管喷嘴 喷嘴位置》.pdf

DIN 28152-1 Bb 1-1999 Clamps for glass lined vessels - Part 1 Dimensions assignment determination of minimum quantity《搪玻璃容器用夹紧装置 第1部分：尺寸、功用和最小参数的测定》.pdf

DIN 28152-1-1999 Clamps for glass lined vessels - Part 1 Dimensions assignment《搪玻璃容器用夹紧装置 第1部分 尺寸 配置》.pdf

DIN 28152-2-1999 Clamps for glass lined vessels - Part 2 Technical delivery conditions《搪玻璃容器用夹紧装置 第2部分 交货技术条件》.pdf

DIN 28153-1-1994 Covers for DN 350 450 500 and 600 openings in glass-lined apparatuses《第1部分 口径公称尺寸为 DN　350 x 450、500 和 600 的玻璃衬里的仪器用闭锁盖》.pdf

DIN 28153-2-1994 Covers for DN 100 up to DN 250 openings in glass-lined apparatuses《第2部分 口径公称尺寸为 DN 100 - DN　250 的玻璃衬里的仪器用闭锁盖》.pdf

DIN 28154-1983 Shaft end for carbon and stainless steel agitators for rotating mechanical seals dimensions《旋转机械密封的碳钢和不锈钢搅拌器的轴端 尺寸》.pdf