NF P43-008-1985 Valves and taps for water supply in buildings Non controllable check valves class B General technical specifications 《建筑物水管阀门 B级非控制非止回动阀 一般技术规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1306-2017 red 0625 Standard Practice for Preparation of Metal and Alloy Samples for Chemical Analysis by Electric Arc Remelting《采用电弧重熔法制备化学分析用金属和合金样品的标准实施规程》.pdf

ASTM E1307-2005 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels《平面遮蔽板.pdf

ASTM E1307-2010 4375 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels《.pdf

ASTM E1309-2000(2005) Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases《数据库中纤维增强聚合物复合材料的识别的标准指南》.pdf

ASTM E1311-1989(2004) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems《热像仪用最低可检测温差的测试方法》.pdf

ASTM E1311-1989(2010) 8125 Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems《热像仪用最低可检测温差的标准试验方法》.pdf

ASTM E1311-2014 red 2821 Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems《热成像系统用可检测的最小温度差的标准实施规程》.pdf

ASTM E1312-1999(2004)e1 Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature《居里温度以上铁磁圆柱棒产品的电磁(涡流)检验.pdf

ASTM E1312-2009 488 Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature《居里温度以上铁磁圆柱棒产品的电磁(涡流)检验的标准实.pdf