NF P50-749-1-1999 Thermal performance of building products and components Specific criteria for the assessment of laboratories measuring heat transfer properties Part 1 common cri.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 7713-1975 Ebonite bars of round section《硬橡胶圆棒材》.pdf

DIN 7714-1975 Ebonite pipes《硬橡胶管》.pdf

DIN 7715-1-1977 Rubber products dimensional tolerances ebonite products《橡胶制件 尺寸公差 硬质胶制品》.pdf

DIN 7715-40-1998 Rubber products - Dimmensional tolerances hoses《橡胶产品 尺寸公差 软管》.pdf

DIN 7715-5-1979 Rubber products dimensional tolerances rubber sheets and products made from sheets《橡胶制品 第5部分 橡胶板材和板材制品尺寸公差》.pdf

DIN 7716-1982 Rubber products requirements for storage cleaning and maintenance《橡胶制品 贮存、清洁和保管要求》.pdf

DIN 7719-1-1985 Endless wide V-belts for industrial speed changers V-belts and groove profiles for corresponding pulleys《工业用变速器用环形三角皮带 第1部分 对应滑轮用三角皮带和凹槽剖面》.pdf

DIN 7719-2-1987 Endless wide V-belts for industrial speed changers measurement of centre distance variations《工业减速装置用环形宽三角皮带 中心距变量的测量》.pdf

DIN 7721-1-1989 Synchronous belt drives metric pitch synchronous belts《同步皮带传动 公制节距 第1部分 同步皮带》.pdf