NF P85-503-1972 Seals Elastomer base mastics used for sealing Determination of weight stability 《缝隙 密封缝隙用弹性胶泥 平衡稳定性测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 10223-2006 Textile machinery and accessories - Flat warp knitting machines - Numbering of guide bars (ISO 10223 2005) English version of DIN ISO 10223 2006《纺织机械和附件 平经编机 导纱梳.pdf

DIN ISO 10228-2011 Cross-country skis - Binding mounting area - Requirements for test screws (ISO 10228 2011)《对越野滑雪橇固定安装部位的试验螺钉的要求(ISO 10228-2011)》.pdf

DIN ISO 10230-2016 Cycles - Splined hub and sprocket - Mating dimensions (ISO 10230 1990)《自行车 键槽后轴身和飞轮 配合尺寸(ISO 10230-1990)》.pdf

DIN ISO 10242-1-2012 Tools for pressing - Punch holder shanks - Part 1 Type A (ISO 10242-1 2011)《压力工具 冲头柄 第1部分 A型》.pdf

DIN ISO 10242-2-2010 Tools for pressing - Punch holder shanks - Part 2 Type C (ISO 10242-2 2008)《压力工具 冲头柄 第2部分 C型(ISO 10242-2-2008)》.pdf

DIN ISO 10242-3-2010 Tools for pressing - Punch holder shanks - Part 3 Type D (ISO 10242-3 2008)《冲压工具 冲头柄 第3部分 D型(ISO 10242-3-2008)》.pdf

DIN ISO 10243 A1-2012 Tools for pressing - Compression springs with rectangular section - Housing dimensions and colour coding (ISO 10243 2010 Amd 1 2011)《冲压工具 矩形截面压力弹簧 弹簧套尺寸和颜色编码 .pdf

DIN ISO 10243-2010 Tools for pressing - Compression springs with rectangular section - Housing dimensions and colour coding (ISO 10243 2010)《冲模 矩形截面压力弹簧 安装尺寸和颜色标识(ISO 10243-2010)》.pdf

DIN ISO 10285-2009 Rolling bearings - Sleeve type linear ball bearings - Boundary dimensions and tolerances (ISO 10285 2007) English version of DIN ISO 10285 2009-11《滚动轴承 套筒型直线球轴承 .pdf