NF P94-071-2-1994 Soil investigation and testing Direct shear test with shearbox apparatus Part 2 cyclic test 《土壤 调查和试验 剪力匣直接剪切试验 第2部分 圆剪切试验》.pdf

相关资源

DB11 T 927-2012 森林土壤调查技术规程.pdf

TD T 1043.1-2013 暗管改良盐碱地技术规程 第1部分土壤调查.pdf

TD T 1043.1-2013 暗管改良盐碱地技术规程 第1部分 ：土壤调查.pdf

LY T 2250-2014 森林土壤调查技术规程.pdf

GB T 36393-2018 土壤质量 自然、近自然及耕作土壤调查程序指南.pdf

ASTM D1452-2007a Standard Practice for Soil Investigation and Sampling by Auger Borings《用螺旋钻孔法对土壤调查和取样的标准实施规程》.pdf

ITU-T L 39 SPANISH-2000 Investigation of the soil before using trenchless techniques《使用不开沟技术前的土壤调查 系列L 施工安装和电缆以及其它外部线缆元件的保护 6号研究组》.pdf

DIN 18135-2012 Soil - Investigation and testing - Oedometer consolidation test《土壤 调查和试验 膨胀剂固结试验》.pdf

DIN 18128-2002 Soil - Investigation and testing - Determination of ignition loss《土壤 调查和检测 灼烧损失测定》.pdf

DIN 18122-2-2000 Soil - investigation and testing - Part 2 Determination of the shrinkage limit《土壤 调查和试验 第2部分 收缩极值测定》.pdf

猜你喜欢

FORD WSS-M4D683-A2-1995 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 40 DUROMETER D HARDNESS HEAT STABILIZED MOLDING COMPOUND《硬度为40 D的受热稳定的乙醚弹性体（TEEE）热塑性聚酯成型料》.pdf

FORD WSS-M4D684-B1-2014 ABS PC BLEND MEDIUM IMPACT STRENGTH MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D690-B1-2013 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND HIGH HEAT RESISTANT INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D695-B1-2017 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND WASHER FLUID RESERVOIR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D695-B1-2018 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND WASHER FLUID RESERVOIR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D703-B1-2014 POLYAMIDE (PA) 66 IMPACT MODIFIED HEAT STABILIZED 35% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D703-B2-2014 POLYAMIDE (PA) 66 IMPACT MODIFIED HEAT STABILIZED UV STABILIZED 35% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D706-A3-2006 POLYAMIDE 66 (PA66) HEAT STABILIZED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定、冲击改性的聚酰胺66(PA66)成型料 与标准FORD WSS-M99P1111-A.pdf

FORD WSS-M4D706-A4-2006 POLYAMIDE (PA) 66 IMPACT MODIFIED HEAT STABILIZED WEATHERABLE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的耐候型冲击改性聚酰胺66成型料 与标准FORD WSS-M99P.pdf