NF P98-739-1992 Road construction and maintenance equipment Clip spreading equipment Fixed measuring test bench and method for chip dosage and distribution 《筑路和养路设备 碎石布料机 试验台与测量碎石护.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D735-A-2010 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 15% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃纤维增强的热塑性聚氨酯弹性体(TPU)成型料 与标.pdf

FORD WSB-M4D738-A-2009 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 30% MINERAL GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%矿物 玻璃纤维增强的热塑性聚氨酯弹性体(.pdf

FORD WSB-M4D740-A2-2012 POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) CALENDERED SHEET VACUUM FORMABLE INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部可形成真空的聚氯乙烯+丙烯腈混合物(PVC+ABS)压光板 与.pdf

FORD WSB-M4D747-A-2010 POLYPHENYLENE ETHER (PPE) MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚苯醚（PPE）改性成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D766-A-2010 POLYETHYLENE TEREPHTHALATE (PET) 35% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《35%玻璃纤维增强模塑材料聚乙烯对苯二甲酸酯 与福特WSS-M99P1111-A.pdf

FORD WSB-M4D780-A-2010 POLYVINYL CHLORIDE (PVC) FLEXIBLE 87 DUROMETER A HARDNESS MOLDING COMPOUND EXTERIOR PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用可印刷的硬度为87 A的聚氯乙烯(PV.pdf

FORD WSB-M4D780-A2-2010 POLYVINYL CHLORIDE (PVC) FLEXIBLE 65 DUROMETER A HARDNESS MOLDING COMPOUND EXTERIOR PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D78.pdf

FORD WSB-M4D812-A-2006 POLYPROPYLENE (PP) COPOLYMER MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4d812-A)《汽车内部用聚丙烯(PP)共聚物成型料 与标准FORD WSS-M99P1111-A一起使.pdf

FORD WSB-M4D813-A-2012 POLYCARBONATE + ABS BLEND (PC+ABS) HIGH IMPACT PLATING GRADE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf