NF P98-771-1994 Road construction and maintenance equipment Driving assistance and control equipment embarked on rollers Terminology Classification 《道路建造及维护设备 压路机驱动和控制设备 术语 分类》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS21092 REV A NOTICE 2-1999 BOLT SELF-LOCKING 250 DEG F CRES 48 KSI FSU 80 KSI FTU 100 DEG FLUSH HEAD CROSS RECESSED《100度深底十字埋头 80 KSI FTU 48 KSI FSU 钢250度自销螺母》.pdf

DLA MS21092 REV A VALID NOTICE 1-1991 BOLT SELF-LOCKING 250 DEG F CRES 48 KSI FSU 80 KSI FTU 100 DEG FLUSH HEAD CROSS RECESSED《100度深底十字埋头 80 KSI FTU 48 KSI FSU 钢250度自销螺母》.pdf

DLA MS21092 REV A-1970 BOLT SELF-LOCKING 250 DEG F CRES 48 KSI FSU 80 KSI FTU 100 DEG FLUSH HEAD CROSS RECESSED《100度深底十字埋头 80 KSI FTU 48 KSI FSU 钢250度自销螺母》.pdf

DLA MS21099 NOTICE 2-1999 BOLT SELF LOCKING CORROSION RESISTING STEEL 80 KSI FTU 250 DEG F 12-POINT EXTERNAL WRENCHING (EXTERNALLY WRENCHING CAP SCREWS)《(外部扳紧螺丝帽)外部扳紧 12点250度 80 KS.pdf

DLA MS21099 VALID NOTICE 1-1991 BOLT SELF LOCKING CORROSION RESISTING STEEL 80 KSI FTU 250 DEG F 12-POINT EXTERNAL WRENCHING (EXTERNALLY WRENCHING CAP SCREWS)《(外部扳紧螺丝帽)外部扳紧 12点250度.pdf

DLA MS21099-1965 BOLT SELF LOCKING CORROSION RESISTING STEEL 80 KSI FTU 250 DEG F 12-POINT EXTERNAL WRENCHING (EXTERNALLY WRENCHING CAP SCREWS)《(外部扳紧螺丝帽)外部扳紧 12点250度 80 KSI FTU 防腐钢.pdf

DLA MS21106 REV B-2010 CLAMP LOOP CUSHIONED 1200 DEG F CRES TYPE IV CLASS B.pdf

DLA MS21122 REV D VALID NOTICE 1-2010 Clamp Loop Cushioned Wedge Polytetrafluoroethylene.pdf

DLA MS21122 REV D-2005 CLAMP LOOP CUSHIONED WEDGE POLYTETRAFLUOROETHYLENE《聚四氟乙烯楔形缓冲扎紧线箍》.pdf