NF Q12-001-1975 Paper and board Characteristics of greaseproof paper 《纸和纸板 防油纸特性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 14752-1969 Handles for spherical inside gauges Design and dimensions《球形内径规用手柄 结构及尺寸》.pdf

GOST 14753-1982 Indicating and recording pneumatic control instruments SSI General specifications《ГСП指示性的和记录性的气动检测仪表 一般技术条件》.pdf

GOST 14754-1969 Equipment for making of stereotype matrices Terms《制造铅版印模用设备 术语》.pdf

GOST 14759-1969 Adhesives Method of determination of shear strength《胶 抗剪强度测定法》.pdf

GOST 1476-1993 Cone-point straight slatted set screws Product grades A and B Specifications《A级及B级精度带槽及圆锥末端定位螺钉 技术条件》.pdf

GOST 14760-1969 Adhesives Method of determination of tensile strength《粘合剂 抗张强度的测定方法》.pdf

GOST 14765-1969 Straight stroke working mechanisms SSI Joint points for controls Sit dimensions《ГСП直通执行机构 与调节机构的连接部位 热行的尺寸》.pdf

GOST 14766-1969 Machines and apparatus for determination of mechanical properties of materials Terms and definitions《测定材料机械性质的机器和仪表 术语和定义》.pdf

GOST 14768-1969 Working devices SSI Methods for determination of capacity《ГСП执行装置 流通能力测定方法》.pdf