NF Q64-015-1981 Graphic technology Printing and printing inks Determination of the resistance of prints to lactic acid 《印刷术 印刷和印刷油墨 印刷品抗乳酸性能测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 9612-2009 Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612 2009)《声学 职业噪声暴露的测定 工程法(ISO 9612-2009)》.pdf

BS EN ISO 9614-1-2009 Acoustics Determination of nsound power levels of noise nsources using sound intensity nPart 1 Measurement at discrete points《声学 利用声音强度测定噪声源功率级 第1部分 离散点测量》.pdf

BS EN ISO 9614-2-1997 Acoustics Determination of sound power levels of noise sources using sound intensity Measurement by scanning《声学 利用声强度对噪声源声功率级别的测定 使用扫描测量法》.pdf

BS EN ISO 9614-3-2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Precision method for measurement by scanning《声学 用声强测定噪声源的声功率级 扫描测量法》.pdf

BS EN ISO 9626-2016 Stainless steel needle tubing for the manufacture of medical devices Requirements and test methods《供制造医疗器械用的不锈钢针管 要求和试验方法》.pdf

BS EN ISO 9653-2000 Adhesives - Test method for shear strength of adhesive bonds《粘合剂 胶粘剪切强度的试验方法》.pdf

BS EN ISO 9664-1995 Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear《粘合剂 拉伸剪切结构胶粘剂疲劳性能的试验方法》.pdf

BS EN ISO 9665-2000 Adhesives - Animal glues - Methods of sampling and testing (ISO 9665 1998)《粘合剂 动物胶 取样和试验方法》.pdf

BS EN ISO 9680-2014 Dentistry Operating lights《牙科学 工作灯》.pdf