NF R16-214-1-1992 Compression-ignition engines Steel tubes for high-pressure fuel injection pipes Part 1 requirements for seamless cold-drawn single-wall tubes 《内燃机 高压注油管用钢管 第1部分 .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D3909-1997b(2004)e1 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules《表面撒矿物粉的铺屋面的沥青卷材(玻璃毛毡)标准规范》.pdf

ASTM D3910-2007 Standard Practices for Design Testing and Construction of Slurry Seal《灰浆密封的设计、测试和施工的标准实施规程》.pdf

ASTM D3910-2011 Standard Practices for Design Testing and Construction of Slurry Seal《稀浆封层的设计 试验和施工的标准操作规程》.pdf

ASTM D3910-2015 Standard Practices for Design Testing and Construction of Slurry Seal《稀浆封层设计 试验和建设的标准实施规程》.pdf

ASTM D3911-2003 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions《设计基本事故(DBA)的模拟条件下评价轻水核电站用涂.pdf

ASTM D3911-2008 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions《设计基本事故(DBA)的模拟条件下评价轻水核电站用涂.pdf

ASTM D3911-2016 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions《在模拟设计依据事故条件下评价轻水核电站用涂料的试验方.pdf

ASTM D3912-2010 Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants《核电站用涂层和衬里的化学耐受性的标准试验方法》.pdf

ASTM D3912-2010(2017) Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants《核电站用涂层和衬里耐化学性的标准试验方法》.pdf