NF R17-103-1988 Road vehicles Commercial vehicles Overall dimensions and mounting clearance of power take-offs and flanged hydraulic pumps 《道路车辆 商用车辆 翻斗车辆用油泵 外廓尺寸和安装间隙》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 30912-3-1990 Sintered metal materials sint-guide-lines part 3 heat-treatment of sintered parts《烧结金属材料 烧结指南 第3部分 烧结件的热处理》.pdf

DIN 30912-4-1990 Sintered metal materials sint-guide-lines part 4 surface-treatment of sintered parts《烧结金属材料 烧结指南 第4部分 烧结件的表面处理》.pdf

DIN 30912-5-1990 Sintered metal materials sint-guide-lines part 5 joining of sintered parts《烧结金属材料 烧结指南 第5部分 烧结件的连接》.pdf

DIN 30912-6-1990 Sintered metal materials sint-guide-lines part 6 fatigue strength of sintered steels《烧结金属材料 烧结指南 第6部分 烧结钢的振动强度》.pdf

DIN 3094-1978 Reel for wire ropes《钢丝绳用绕轴》.pdf

DIN 30950-1999 Fusion hardening - General description of method《熔化淬火 方法的概要说明》.pdf

DIN 30960-1999 Fusion hardening with additional materials - Specification for fusion hardening (SHA) - Form sheet《用附加材料的熔化淬火 熔化淬火规范 表格纸》.pdf

DIN 30965-2000 Laser engineering - Laser beam hardenability test《激光技术 激光束淬透性试验》.pdf

DIN 30999-1999 Hardmetals - Rockwell test (scales A and 45N) - Calibration of reference blocks out of hardmetals to be used for the verification and calibration of hardness testing.pdf