NF R96-201-1931 Direction of rotation of machines and equipment 《机器和仪表转动方向》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 30852 9-2002 Electrical apparatus for explosive gas atmospheres Part 10 Classification of hazardous areas《爆炸性气体环境用电气设备 第10部分 危险区域分类》.pdf

GOST 30858-2003 Products wear resistance assurance Thribotechnical requirements and indices Principles of provision General《产品耐磨性 摩擦技术要求和指数 供应原则 概述》.pdf

GOST 30869-2003 Safety of machinery Safety requirements for fluid power systems and their components Pneumatics《机械安全性 流体动力系统及其构件的安全性要求 气体力学》.pdf

GOST 30877-2003 Textiles Machine-made floor coverings and carpets Safety characteristics and methods for determination of them《纺织品 机加工地板蒙皮和地毯 安全性特征及其测定方法》.pdf

GOST 30878-2003 Textiles Floor coverings Method for determination of electric resistance《纺织品 地板蒙皮 电阻测定方法》.pdf

GOST 30884-2003 Ready-mixed oil paints General specifications《调和漆 通用规范》.pdf

GOST 30892-2002 Basic norms of interchangeability Metrical MJ theads Profile general plan tolerances《互换性的基本规范 测量用MJ螺纹 剖面 总方案 容差》.pdf

GOST 30893 1-2002 Basic norms of interchangeability General tolerances Limit deviations for linear and angular dimensions without tolerance indications《互换性的基本规范 一般容差 无容差标记的线性和角向尺寸的.pdf

GOST 30893 2-2002 Basic norms of interchangeability General tolerances Tolerances of form and position for features without individual tolerance indications《互换性的基本规范 一般容差 无单个容差标记的特.pdf