NF S31-078-4-1989 Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 4 methods for stated values for batches .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSF-M3D165-A-2006 UNSATURATED POLYESTER (UP) 12% GLASS FIBER REINFORCED HIGH HEAT RESISTANT COMPRESSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《12%玻璃纤维增强的不饱和聚酯.pdf

FORD WSF-M3D166-A-2004 UNSATURATED POLYESTER (UP) 15% GLASS FIBER REINFORCED HIGH HEAT RESISTANT COMPRESSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃纤维增强的不饱和聚酯.pdf

FORD WSF-M3D167-A-2006 UNSATURATED POLYESTER (UP) 24% GLASS FIBER WSF-M3D167-A REINFORCED HIGH HEAT RESISTANT COMPRESSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《24.pdf

FORD WSF-M3G207-A-2011 LABEL ACRYLIC FILM TWO LAYER LASER ENGRAVABLE PRESSURE SENSITIVE TO BE USED WITH FORD WSS-M99P1111-A 《有两层丙烯酸膜的激光可雕刻压敏材料制成的标签 与福特WSS-M99P1111-A 一起使用[使用 福特.pdf

FORD WSF-M3G213-A-2006 TAPE GLASS CLOTH PRESSURE SENSITIVE DOUBLE SIDED SILICONE ADHESIVE TO BE USED WITH FORD WSS-M99P1111-A 《双面涂覆硅橡胶胶粘剂的压敏玻璃布胶带 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSF-M3G215-A-2006 TAPE TWO SIDED PRESSURE SENSITIVE ADHESIVE FILM THERMALLY CONDUCTIVE TO BE USED WITH FORD WSS-M99P1111-A 《热传导型双面压敏胶粘剂薄膜式胶带 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSF-M3G39-B-2005 TAPE REINFORCED POLYESTER COMPOSITE FILM PRESSURE SENSITIVE THERMOSETTING ADHESIVE ELECTRICAL TO BE USED WITH FORD WSS-M99P1111-A 《电气用带压敏热固胶粘剂的增强聚酯复合薄膜式胶带 .pdf

FORD WSF-M3L72-A2-2003 EPOXY POWDER ELECTRICAL INSULATION ELECTROSTATIC FLUIDIZED BED APLICATION FUEL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐燃料腐蚀的静电流化床用途用电绝缘环氧树脂粉末 与标准F.pdf

FORD WSF-M3L77-B-2003 EPOXY RESIN POTTING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《灌封胶用环氧树脂 与标准FORD WSS-M99P1111-A一起使用 》.pdf