NF S31-090-1995 TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE EMITED BY HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES PART 1 GENERAL REQUIREMENTS (EUROPEAN STANDARD E.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 2606-1955 Specification for X-ray protective gloves for medical diagnostic purposes up to 150 kV peak《峰值达150kV的医疗诊断用X射线防护手套规范》.pdf

BS 2610-1978 Method of test for the determination of the cuprammonium fluidity of cotton and certain cellulosic man-made fibres《棉与某些含纤维素人造纤维的铜铵溶液流动性的测定试验方法》.pdf

BS 2621-5-1979 Specifications for glycerol《甘油规范》.pdf

BS 2626-1992 Specification for lubricants for refrigerant compressors《制冷压缩机用润滑油规范》.pdf

BS 2627-1970 Specification for wrought aluminium for electrical purposes - Wire《电工用锻铝规范 线材》.pdf

BS 2634-1-2010 Roughness comparison specimens nPart 1 Specification for turned ground nbored milled shaped and planed specimens《粗糙度比对试样 车、磨、镗、铣、成形和刨削试样规范》.pdf

BS 2634-2-2010 Roughness comparison nspecimens nPart 2 Specification for spark-eroded nshot blasted grit-blasted and polished nspecimens《表面粗糙度比对试样 第2部分 电火花加工 喷丸处理 喷砂处理及抛光试样规范》.pdf

BS 2646-1-1993 Autoclaves for sterilization in laboratories - Specification for design construction safety and performance《实验室高压灭菌釜 第1部分 设计、制造、安全和性能规范》.pdf

BS 2646-2-1990 Autoclaves for sterilization in laboratories - Guide to planning and installation《实验室灭菌用高压釜 第2部分 设计与安装指南》.pdf