NF T12-022-1983 Pulps Determination of alkali resistance 《纸浆 耐碱性的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESA-M4D465-A2-2011 TUBING PTFE - POLYPHENYLENE SULFIDE FILLED TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESA-M4D465-A1)《聚四氟乙烯聚亚苯基硫醚填充管材 与福特WSS-M99P1111-A 一起使用 在福特E.pdf

FORD ESA-M4D472-A-2006 POLYPROPYLENE COPOLYMER INJECTION MOLDED TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D638-C)《聚丙烯（PP）共聚物注塑塑料 与标准FORD WSS-M99P1111-A一起使用 使用WSS-M4D638-C》.pdf

FORD ESA-M4D568-A-2010 THERMOPLASTIC POLYURETHANE (TPU) MOLDING COMPOUND 40% LONG GLASS FIBER FILLED TO BE USED WITH FORD WSS-M99P1111-A 《40%长玻璃纤维填充的热塑性聚氨酯（TPU）成型料 与标准FORD WSS-M.pdf

FORD ESA-M4D57-A-2009 POLYURETHANE (PUR) FOAM OPEN FINE CELL TO BE USED WITH FORD WSS-M99P1111-A 《小开孔聚氨酯（PUR）泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M4D614-A-2005 POLYVINYL CHLORIDE (PVC) PLASTISOL TO BE USED WITH FORD WSS-M99P1111-A 《聚氯乙烯（PVC）塑性溶胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M4G294-A-1988 SEALER SILICONE RUBBER - NEUTRAL CURE《中性固化的硅橡胶密封剂》.pdf

FORD ESA-M4P8-C-2003 HARDCOAT ANODIZE FINISH FOR ALUMINUM - UNSEALED TO BE USED WITH FORD WSS-M99P1111-A 《用于不密封的铝面的阳极化处理硬涂层 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M5P7-A-1983 METALLIZE SECOND SURFACE DECORATIVE EXTERIOR《汽车外部用第二面涂覆金属的装饰材料》.pdf

FORD ESA-M62J13-B-2012 PAINT WATERBORNE ANODIC ELECTROCOAT ACRYLIC ENAMEL TO BE USED WITH FORD WSS-M99P1111-A .pdf