NF T20-242-1982 Liquid chlorine for industrial use Determination of the content of chlorine by volume in the vaporized product 《工业用液态氯 用容量法测定经蒸发制品的氯含量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 6935 Bb 1-2011 Cold bending of flat rolled steel - Supplement 1 Factors determining the correction value for calculating length of flats prior to bending《平轧钢冷弯加工 补充件1 决定扁钢冷弯加工前.pdf

DIN 6935 Bb 2-2011 Cold bending of flat steel products - Supplement 2 Calculated compensating values 《冷弯钢或扁钢产品 补充件2 计算的补偿值》.pdf

DIN 6935-2011 Cold bending of flat rolled steel《平轧钢冷弯》.pdf

DIN 695-1986 Grade 2 chain slings with hook or ring type terminal fittings《带钩式或环式端配件的2级链式吊索》.pdf

DIN 705-2007 Adjusting rings《调整环》.pdf

DIN 7079-1 Bb 1-1996 Pressure resistant circular glass-to-metal used sight glasses - Part 1 For holders with recess design glass in material No 1 4462《耐压圆形玻璃-金属用视孔玻璃板 第1部分 带凹陷的支座 设.pdf

DIN 7079-1 Bb 2-1996 Pressure resistant circular glass-to-metal fused sight glasses - Part 1 For holders with recess design steel operating temperatures -30 C and -60 C《耐压圆形熔结玻璃与金属.pdf

DIN 7079-1-2015 Pressure resistant circular glass-to-metal fused sight glasses - Part 1 For holders with recess《抗压力的圆形玻璃－金属熔融观察镜 第1部分 用于带槽面夹持装置》.pdf

DIN 7080-2005 Pressure resistant circular sight glasses of borosilicate glass without limitation in the range of low temperature《低温范围内无限制的硼硅酸盐玻璃制抗压圆形视孔玻璃》.pdf