NF T30-082-1989 Paints and varnishes Washability test 《涂料和清漆 耐洗性试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 12FTM20-2012 The Effect of the Surface Roughness Profile on Micropitting.pdf

AGMA 12FTM21-2012 Typical Heat Treatment Defects of Gears and Solutions Using FEA Modeling.pdf

AGMA 12FTM22-2012 Crack Testing and Heat Treat Verification of Gears Using Eddy Current Technology.pdf

AGMA 12FTM23-2012 Enhancing Control of Distortion Through One Piece Flow C Heat Treatment.pdf

AGMA 12FTM24-2012 Recent Inventions and Innovations in Induction Hardening of Gears and Gear-like Components.pdf

AGMA 13FTM01-2013 Power Skiving of Cylindrical Gears on Different Machine Platforms.pdf

AGMA 13FTM02-2013 Performance and Technological Potential of Gears Ground by Dressable cBN Tools.pdf

AGMA 13FTM03-2013 Analysis of Gear Root Forms A Review of Designs Standards and Manufacturing Methods for Root Forms in Cylindrical Gears.pdf

AGMA 13FTM04-2013 Best Practices for Gearbox Assembly and Disassembly.pdf