NF T30-702-1983 Paints Thick coatings Resistance of adhesiveness to artificial weathering 《涂料 厚塑料涂层 粘合剂耐人工老化的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6200-2001(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis《通过冷却曲线分析测定淬火油冷却特性的标准试验方法》.pdf

ASTM D6200-2001(2012) 8125 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis《通过冷却曲线分析测定淬火油冷却特性的标准试验方法》.pdf

ASTM D6200-2001(2017) 8750 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis《冷却曲线分析法测定淬火油冷却特性的标准试验方法》.pdf

ASTM D6201-2004 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation《进油阀沉积物形成用火花点燃式发动机无铅燃料的功率计评定标准试验方法》.pdf

ASTM D6201-2004(2009) 8750 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation《进油阀沉积物形成用火花点燃式发动机无铅燃料的功率计评定标准试验.pdf

ASTM D6201-2004(2014) 0746 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation《对火花点火发动机无铅燃料评定进料阀沉淀形成的测力计的标准试验方.pdf

ASTM D6201-2018 5625 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation.pdf

ASTM D6203-2006 Standard Test Method for Thermal Stability of Way Lubricants《导轨润滑剂的热稳定性的标准试验方法》.pdf

ASTM D6203-2006(2012) 8125 Standard Test Method for Thermal Stability of Way Lubricants《导轨润滑剂热稳定性的标准试验方法》.pdf