NF T31-102-1998 Extenders for paints Specifications and methods of test Part 2 barytes (natural barium sulfate) 《涂料用填料 规范和试验方法 第2部分 重晶石(天然硫酸钡)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 28512 3-1990 Mineral fertilizers Method for determination of bulk density (loose) of fine-grained fertilizers《矿物肥料 微粒状肥料非填实散堆密度测定法》.pdf

GOST 28514-1990 Construction geotechnics Determination of soil density by volume displacement method《建筑地质技术 用容积置换法测定土壤密度》.pdf

GOST 28516-1990 Soil working rotary blades General technical requirements《土壤耕作旋转犁 一般技术要求》.pdf

GOST 28517-1990 Nondestructive testing Mass-spectrometer method of leak testing General requirements《无损检验 质谱检漏法 一般要求》.pdf

GOST 28519-1990 Medical bone saws General technical requirements and test methods《医用锯 一般技术要求及试验方法》.pdf

GOST 28520-1990 Packages filled transport Low pressure test《包装 低压试验方法》.pdf

GOST 28521-1990 Cutting tools Series of shank diameters《切削刀具 柄部直径系列》.pdf

GOST 28522-1990 Steel welded airtanks with pressure up to 6 3 MPa Types main parameters and technical requirements《耐压到6 3MPa的钢焊接的空气保存器 型式 基本参数 技术要求》.pdf

GOST 28523-1990 Mobile means of small-scale mechanization of agricultural works Small-sized tractors Types and main parameters《农业工作小型机械化轻便设备 小型拖拉机 型式和基本参数》.pdf