NF T60-103-1968 Petroleum products Closed cup flash point of lubricants and fuel oils 《石油产品 润滑剂和燃油在密封容器中闪点的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D2714-1994(2014) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine《环块摩擦试验机和磨损试验机校准和操作的标准试验方法》.pdf

ASTM D2715-1992(2007) Standard Test Method for Volatilization Rates of Lubricants in Vacuum《真空中润滑剂挥发速率的标准试验方法》.pdf

ASTM D2717-1995(2005) Standard Test Method for Thermal Conductivity of Liquids《液体导热性的标准试验方法》.pdf

ASTM D2718-2000(2006) Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)《结构受力壁板平面剪切(滚剪)的试验方法》.pdf

ASTM D2718-2000(2011) Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)《平面剪切(滚剪)结构板的标准试验方法》.pdf

ASTM D2718-2000(2011)e1 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)《平面剪切(滚动剪切)结构板的标准试验方法》.pdf

ASTM D2719-1989(2007) Standard Test Methods for Structural Panels in Shear Through-the-Thickness《胶合板纵向剪切的标准试验方法》.pdf

ASTM D2719-2013 Standard Test Methods for Structural Panels in Shear Through-the-Thickness《胶合板纵向剪切的标准试验方法》.pdf

ASTM D2720-1994(2006) Standard Practice for Calculation of Commercial Weight and Yield of Scoured Wool Top and Noil for Various Commercial Compositions《商业用各种洗净羊毛、毛条及短毛的商业公定重量和产量计算的.pdf