NF T60-147-2003 Petroleum products - Determination of softening point of paraffin products - Ring and ball method 《石油产品 石蜡产品软化点的测定 环形法和球体法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 20108-2017 en Simultaneous interpreting - Quality and transmission of sound and image input - Requirements.pdf

EN ISO 20109-2016 en Simultaneous interpreting - Equipment - Requirements《同声传译设备要求(ISO 20109 2016)》.pdf

EN ISO 20126-2012 en Dentistry - Manual toothbrushes - General requirements and test method (Incorporates Amendment A1 2018)《牙科学 手动牙刷 一般要求和试验方法》.pdf

EN ISO 20127-2005 en Dentistry - Powered toothbrushes - General requirements and test methods《牙科学 电动牙刷 一般要求和试验方法 ISO 20127-2005》.pdf

EN ISO 20136-2017 en Leather - Determination of degradability by microorganisms《皮革-微生物降解测定(ISO 20136 2017)》.pdf

EN ISO 20137-2017 en Leather - Chemical tests - Guidelines for testing critical chemicals in leather《皮革-化学测试-皮革中关键化学品测试指南(ISO 20137 2017)》.pdf

EN ISO 20182-2008 en Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns《耐火试样制备 用混合型气动喷嘴枪喷涂耐火板》.pdf

EN ISO 20200-2005 1250 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratoryscale test《塑料 在实验室试验中模拟堆肥处.pdf

EN ISO 20200-2015 en Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test《塑料 在实验室规模的试验中模拟堆.pdf