NF T75-423-1998 Oil of cassia Chinese type Determination of trans-cinnamaldehyde content Gas chromatographic method on capillary columns 《中国型肉桂油 trans－肉桂醛含量的测定 毛细管柱气相色谱法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M15P41-A-2013 PERFORMANCE REQUIREMENTS HOOD ASSEMBLY CONVERTIBLE TOP DUST COVER TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M15P42-A-2013 PERFORMANCE CHILD SEAT LINER FABRIC - FOAM LAMINATED COMPOSITE WITH HOT STAM LABEL TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M15P43-A-2010 PERFORMANCE HEADREST BLOW MOLDED FOAM INJECTED TO BE USED WITH FORD WSS-M99P1111-A 《泡沫喷注吹塑头靠的性能 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M15P39-B］》.pdf

FORD WSB-M16J16-A-2012 PAINT WATERBORNE 2 COMPONENT COMPLIANCE VOC PLASTICS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M17H164-A-2006 PADDING POLYURETHANE (PUR) SLAB POLYETHYLENE FILM COATED CONTROLLED CELL SIZE TO BE USED WITH FORD WSS-M99P1111-A 《孔尺寸控制的聚乙烯薄膜涂层的板状聚氨酯(PUR)衬垫 与标准FORD WSS.pdf

FORD WSB-M17H165-A-2006 INSULATOR COMPOSITE ARAMID POLYESTER ALUMINUM FOIL POLYESTER ALUMINUM FOIL TO BE USED WITH FORD WSS-M99P1111-A 《芳族聚酰胺 聚酯、铝箔、聚酯和铝箔复合材料绝缘体 与标准FORD WSS-M99P.pdf

FORD WSB-M17H167-A-2006 MAT POLYESTER FLAT NEEDLED LATEX BACKCOATED TO BE USED WITH FORD WSS-M99P1111-a (USE WSS-M99P32-B)《乳胶衬底的聚酯扁平针刺垫 与标准FORD WSS-M99P1111-A一起使用 使用标准WSS-M99P3.pdf

FORD WSB-M17H168-A-2006 PADDING POLYPROPYLENE ACRYLIC POLYESTER NEEDLEd COMPRESSION MOLDABLE TO BE USED WITH FORD WSS-M99P1111-A 《可模压的聚丙烯(PP) 丙烯酸 聚酯针刺衬垫 与标准FORD WSS-M99P1111-A一起.pdf

FORD WSB-M17H93-C10-2006 PADDING POLYURETHANE FOAM SLAB KNIT FABRIC REINFORCED MODERATE STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《中等强度织物增强的板状聚氨酯泡沫衬垫 与标准FORD WSS-M99P1111-A一起.pdf