NF T76-003-1998 Adhesives Determination of acid value 《粘接剂 酸值测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 3329-2009 en Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealed - Sheet and strip - 0 3 mm less than or equal to a less than or equal to 2 mm - For prevailing torque nuts《航.pdf

EN 3330-2009 en Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealead - Bar and wire - De less than or equal to 40 mm - For prevailing torque nuts《航空航天系列 FE-PL1503(35CrMo4)型钢 退火.pdf

EN 3332-2005 en Aerospace series - Aluminium alloy AL-P7475-T762 Clad sheet and strip 1 0 mm less than or equal to a less than or equal to 6 mm《航空航天系列 AL-P7475-T762型铝合金 覆层铝合金薄板材和带材.pdf

EN 3333-2005 en Aluminium alloy AL-P7475-T762 Sheet and strip 0 6 mm less than or equal to a less than or equal to 6 mm《铝合金AL-P7475-T762 覆层薄板和带材 0 6 mm≤a≤6 mm》.pdf

EN 3335-2005 en Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0 8 mm less than or equal to a less than or equal to 6 mm《航空航天系列 铝合金AL-P7475.pdf

EN 3338-2005 en Aluminium alloy AL-P7050 T74511 Extruded bar and section a or D less than or equal to 150 mm with peripheral coarse grain control《AL-P7050型铝合金 T74511 挤压棒材和型材 周边粗粒控制.pdf

EN 3339-2006 en Aerospace series - Aluminium alloy AL-P7010- - T76 - Die forgings - a less than or equal to 200 mm《航天航空系列 AL-P7010-T76型铝合金 模锻件 a≤200mm》.pdf

EN 334-2005 en Gas pressure regulators for inlet pressures up to 100 bar (Incorporates Amendment A1 2009)《入口压力100巴及以下用气体压力调节器 包含修改件A1-2009》.pdf

EN 3341-2005 en Aluminium alloy AL-P6061-T4 or T42 Sheet and strip 0 4 mm less than or equal to a less than or equal to 6 mm《铝合金AL-P6061-T4或T42 薄板和带材 0 4 mm≤a≤6 mm》.pdf