NF T90-432-1999 Water quality - Detection and enumeration of intestinal enterococci in surface and waste water - Part 1 miniaturized method (Most Probable Number) by inoculation i.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS SR ISO 1798-1983 Polymeric materials cellular flexible Determination of tensiie strength and elongation at break.《高聚物多孔材料．张力强度和断裂延伸率的测定》.pdf

STAS SR ISO 1807-1995 Continuous mechanica! handling equipment for loose bulk materials - Oscillating conveyors and shaking or reciprocating feeders with rectangular or trapezoidal.pdf

STAS SR ISO 1815-1995 Continuous mechanical handling equipment for Ioose bulk materials -Vibrating feeders and conveyors《大量松散材料的连续机械装卸设备．振动供料机和传送带 》.pdf

STAS SR ISO 1816-1995 Continuous mechanical handling equipment for loose bulk materials and unit loads - Belt conveyors - Basic characteristics of motorized driving pulleys《大型松散材料和.pdf

STAS SR ISO 1819-1994 Continuous mechanical handling equipment - Safety code - General rules《连续机械装卸设备．安全规范．一般规则 》.pdf

STAS SR ISO 1826-1981 Vulcanized rubber Time interval between vulcanization and testing - Specifications《硫化橡胶 硫化和测试的时间间隔．规格》.pdf

STAS SR ISO 1832-1995 Indexable inserts for cutting tools - Designation《切削工具的刀片．指定 》.pdf

STAS SR ISO 1833+A1-1995 Textiles - Binary fibre mixtures - Quantitative chemical analysis《纺织．二元纤维混合物．定量化学分析 》.pdf

STAS SR ISO 1872-1-1995 Plastics - Polyethylene (PE) moulding and extrusion materials-Part 1 Designation system and basis for specifications《塑料．聚乙烯PE模塑和喷出材料．第1部分：表示系统和基础规范》.pdf