NF X11-636-1985 Size analysis-Representation of particle size distributions - Adjustment of an experimental cumulative curve to a reference model - Case of sieving《尺寸分析 粒度分布的表示 将实验.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1994-1998(2003) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans《使用过程导向的平均质量检查最低限和批量允许不良率的抽样方案的标准操作规程》.pdf

ASTM E1994-2008 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans.pdf

ASTM E1994-2009 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans《使用过程导向的平均质量检查最低限和批量允许不良率的抽样方案的标准实施规程》.pdf

ASTM E1994-2009(2013) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans《使用过程导向的平均质量检查最低限和批量允许不良率的抽样方案的标准操作规程》.pdf

ASTM E1994-2009(2018) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans.pdf

ASTM E1995-2004a Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber With the Test Specimen Oriented Horizontally《在单.pdf

ASTM E1995-2008 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber With the Test Specimen Oriented Horizontally《在单个.pdf

ASTM E1995-2012 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber With the Test Specimen Oriented Horizontally《试件水.pdf

ASTM E1995-2016 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber With the Test Specimen Oriented Horizontally《在单闭.pdf