NF Z82-109-1995 Integrated Services Digital Network (ISDN) Circuit mode 64 kbit S 8 kHz structured bearer service category usable for speech information transfer Service descriptio.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NBN E 66-108-1982 3750 《莫氏圆锥形头钻机 超长系列 尺寸》.pdf

NBN E 66-109-1985 6875 《圆柱形钻头扩孔钻或事先限定的莫氏圆锥形头扩孔钻》.pdf

NBN E 66-111-1983 5000 《中心钻》.pdf

NBN E 66-301-1973 3750 《金属铣刀镗和其榫或键的驱动装置》.pdf

NBN E 66-601-1975 1875 《用平行销子进行固定的带有一个导椎的整体滚刀1到20的标准尺寸绞刀或直径侧伏角1到20的绞刀的名义尺寸，毫米系列》.pdf

NBN E 66-603-1975 6875 《用平行销子进行固定的带有一个导椎的整体滚刀，直径侧伏角，1到20的绞刀的名义尺寸，英尺系列》.pdf

NBN E 82-001-1972 0625 《热模压，有色金属零件相关的有益实践法规》.pdf

NBN EN 1048-1993 0625 Heat exchangers - Air cooled liquid coolers dry coolers - Test procedure for establishing the performance《热交换器风冷液体冷却器“干冷塔” 功率确定用检验方法》.pdf

NBN EN 1094-7-1994 3125 《绝热耐火材料产品 第7部分：陶瓷纤维产品试验方法》.pdf