NFPA 13 AMD 1-2015 Standard for the Installation of Sprinkler Systems (Effective Date 9 7 2015).pdf

上传人:syndromehi216 文档编号:1008266 上传时间:2019-03-19 格式:PDF 页数:2 大小:32.78KB
下载 相关 举报
NFPA 13 AMD 1-2015 Standard for the Installation of Sprinkler Systems (Effective Date 9 7 2015).pdf_第1页
第1页 / 共2页
NFPA 13 AMD 1-2015 Standard for the Installation of Sprinkler Systems (Effective Date 9 7 2015).pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 Tentative Interim Amendment NFPA 13 Standard for the Installation of Sprinkler Systems 2016 Edition Reference: 17.2.3.5.6, A.17.2.3.5 and A.17.3.3.5 TIA 16-1 (SC 15-8-14 / TIA Log #1165) Note: Text of the TIA was issued and approved for incorporation into the document prior to printing. 1. Revise s

2、ection 17.2.3.5.6 to read as follows: 17.2.3.5.6 The minimum operating pressure shall be either 30 psi (2.0 bar) or 60 psi (4.1 bar) based upon the applicable storage and ceiling height for the installation as follows: a) 30 psi (2.0 bar) for storage heights up to 25 ft (7.6 m) with a maximum ceilin

3、g height of 30 ft (9.1 m) b) 60 psi (4.1 bar) for storage heights up to 25 ft. (7.6 m) with a maximum ceiling height of 40 ft (12.2 m). 2. Revise section A.17.2.3.5 to read as follows: A.17.2.3.5 The Fire Protection Research Foundation conducted a series of full-scale fire tests at Underwriters Labo

4、ratories to develop protection criteria for the rack storage of exposed expanded Group A plastic commodities. The tests are documented in the report, “Protection of Rack Stored Exposed Expanded Group A Plastics with ESFR Sprinklers and Vertical Barriers.” The criteria for exposed expanded plastics a

5、re based on Tests 2, 3, 7 and 8 of the series, which investigated a 40 ft (12.2 m) ceiling with a range of storage heights. The tests used K-25.2 intermediate-temperature ESFR sprinklers with vertical barriers attached to the rack uprights at nominal 16 ft (4.9 m) apart. Vertical barriers of sheet m

6、etal and 38 -in. plywood were both investigated. In Tests 1 through 6, transverse flue spaces between commodities were blocked. Comparing the results of Test 6 with blocked transverse flue spaces and Test 7 with no blocking of transverse flue spaces, the number of operated sprinklers decreased from

7、11 to 7 and improved suppression of the fire. The criteria for exposed expanded plastics are based on Tests 9 and 10 of the series, which investigated a 30 ft (9.1 m) ceiling with a range of storage heights. The tests used K-25.2 intermediate-temperature ESFR sprinklers with vertical barriers attach

8、ed to the rack uprights at 16 ft (4.9 m) (nominal) apart. Vertical barriers of 3 8 -in. plywood was investigated. The area limitation between the vertical barriers and aisles indicated in 17.3.3.5.9.2 will limit the depth of a multiple-row rack arrangement. The hose stream allowance and water supply

9、 duration requirements considered the burning characteristics of the exposed expanded plastic commodity that generates a high rate of heat release very quickly, but the commodity involved in the combustion process is then quickly consumed after fire suppression or control is achieved. 3. Revise sect

10、ion A.17.3.3.5 to read as follows: A.17.3.3.5 The Fire Protection Research Foundation conducted a series of full-scale fire tests at Underwriters Laboratories to develop protection criteria for the rack storage of exposed expanded Group A plastic commodities. The tests are documented in the report,

11、Protection of Rack Stored Exposed Expanded Group A Plastics with ESFR Sprinklers and Vertical Barriers.” The criteria for exposed expanded plastics are based on Tests 2, 3,7 and 8 of the series, which investigated a 40 ft (12.2 m) ceiling with a range of storage heights. The tests used K-25.2 inter

12、mediate-temperature ESFR sprinklers with vertical barriers attached to the rack uprights at nominal 16 ft (4.9 m) apart. Vertical barriers of sheet metal and 3 8 -in. plywood were both investigated. In Tests 1 through 6, transverse flue spaces between commodities were blocked. Comparing the results

13、of Test 6 with blocked transverse flue spaces and Test 7 with no blocking of transverse flue spaces, the number of operated sprinklers decreased from 11 to 7 and improved suppression of the fire. The area limitation between the vertical barriers and aisles indicated in 17.3.3.5.9.2 will limit the de

14、pth of a multiple-row rack arrangement. The hose stream allowance and water supply duration requirements considered the burning characteristics of the exposed expanded plastic commodity that generates a high rate of heat release very quickly, but the commodity involved in the combustion process is then quickly consumed after fire suppression or control is achieved. Issue Date: August 18, 2015 Effective Date: September 7, 2015 (Note: For further information on NFPA Codes and Standards, please see www.nfpa.org/codelist) Copyright 2015 All Rights Reserved NATIONAL FIRE PROTECTION ASSOCIATION

展开阅读全文
相关资源
猜你喜欢
  • ASD-STAN PREN 3545-005-2013 Aerospace series Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures 55 to 175 Part .pdf ASD-STAN PREN 3545-005-2013 Aerospace series Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures 55 to 175 Part .pdf
  • ASD-STAN PREN 3545-006-1995 Aerospace Series Connectors Electrical Rectangular with Sealed and Non-Sealed Rear Plastic Housing Locking Device Operating Temperatures - 55 Degrees C .pdf ASD-STAN PREN 3545-006-1995 Aerospace Series Connectors Electrical Rectangular with Sealed and Non-Sealed Rear Plastic Housing Locking Device Operating Temperatures - 55 Degrees C .pdf
  • ASD-STAN PREN 3545-007-2013 Aerospace series Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures - 55 to 175 Par.pdf ASD-STAN PREN 3545-007-2013 Aerospace series Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures - 55 to 175 Par.pdf
  • ASD-STAN PREN 3545-008-2005 Aerospace Series Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures - 55 degrees C .pdf ASD-STAN PREN 3545-008-2005 Aerospace Series Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures - 55 degrees C .pdf
  • ASD-STAN PREN 3545-009-2006 Aerospace series Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures 55 to 175 Part .pdf ASD-STAN PREN 3545-009-2006 Aerospace series Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures 55 to 175 Part .pdf
  • ASD-STAN PREN 3550-1988 Aerospace Series Aluminium Alloy (2024) Solution Treated Stretched and Artificially Aged (T8511) Extruded Bars and Sections (a or D) Less Than or Equal to 1.pdf ASD-STAN PREN 3550-1988 Aerospace Series Aluminium Alloy (2024) Solution Treated Stretched and Artificially Aged (T8511) Extruded Bars and Sections (a or D) Less Than or Equal to 1.pdf
  • ASD-STAN PREN 3552-2003 Aerospace Series Aluminium Alloy AL-P2618A T6 or T62 Clad sheet and strip 0 4 Less Than or Equal to a Less Than or Equal to 6 mm (Issue P 2)《航空航天系列 0 4mm≤a≤.pdf ASD-STAN PREN 3552-2003 Aerospace Series Aluminium Alloy AL-P2618A T6 or T62 Clad sheet and strip 0 4 Less Than or Equal to a Less Than or Equal to 6 mm (Issue P 2)《航空航天系列 0 4mm≤a≤.pdf
  • ASD-STAN PREN 3553-1999 Aerospace Series Aluminium Alloy AL-P2618A T6511 Extruded Bar and Section a or D Less Than or Equal to 160mm (Edition P 2)《航空航天系列 a或D≤160mm的铝合金AL-P2618A T65.pdf ASD-STAN PREN 3553-1999 Aerospace Series Aluminium Alloy AL-P2618A T6511 Extruded Bar and Section a or D Less Than or Equal to 160mm (Edition P 2)《航空航天系列 a或D≤160mm的铝合金AL-P2618A T65.pdf
  • ASD-STAN PREN 3554-1988 Aerospace Series Aluminium Alloy (7010) Solution Treated Cold Compressed and Artificially Aged (T7652) Hand Forgings a Less Than or Equal to 200 mm (Issue P.pdf ASD-STAN PREN 3554-1988 Aerospace Series Aluminium Alloy (7010) Solution Treated Cold Compressed and Artificially Aged (T7652) Hand Forgings a Less Than or Equal to 200 mm (Issue P.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1