1、 Errata NFPA 285 Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components 2012 Edition Reference: Figures 6.1(a) and 7.1.6(a) Errata No.: 285-12-1 The Committee on Fire Tests notes the following error
2、in the 2012 edition of NFPA 285, Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components 1. Replace existing Figure 6.1(a) and Figure 7.1.6(a) with the following: Figure 6.1(a) Front View of Test Spec
3、imen Superimposed over Test Apparatus Thermocouple Locations. Figure 7.1.6(a) Front View of Calibration Wall Assembly Superimposed over Test Apparatus. Calibration instrumentation locations (not to scale). The dimension between thermocouple 1 and the top of the window opening should be shown as 6 in
4、 (152 mm). The dimension between the top of the window opening to thermocouple 2 should be shown as 1 ft (305 mm). Issue Date: August 28, 2012 (Note: Electronic products and pamphlet reprints may have this errata incorporated. For current information about the NFPA Codes and Standards, including this errata, please see www.nfpa.org/codelist) Copyright 2012 All Rights Reserved NATIONAL FIRE PROTECTION ASSOCIATION
