NFPA 55 AMD 2-2016 en Compressed Gases and Cryogenic Fluids Code (Effective Date 04 26 2016).pdf

上传人:confusegate185 文档编号:1008706 上传时间:2019-03-19 格式:PDF 页数:1 大小:29.30KB
下载 相关 举报
NFPA 55 AMD 2-2016 en Compressed Gases and Cryogenic Fluids Code (Effective Date 04 26 2016).pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 Tentative Interim Amendment NFPA55 Compressed Gases and Cryogenic Fluids Code 2016 Edition Reference: 11.3.2.2.1 and 11.3.2.2.2* TIA 16-2 (SC 16-4-7 / TIA Log #1208) Pursuant to Section 5 of the NFPA Regulations Governing the Development of NFPA Standards, the National Fire Protection Association h

2、as issued the following Tentative Interim Amendment to NFPA 55, Compressed Gases and Cryogenic Fluids Code, 2016 edition. The TIA was processed by the Technical Committee on Industrial and Medical Gases, and was issued by the Standards Council on April 6, 2016, with an effective date of April 26, 20

3、16. A Tentative Interim Amendment is tentative because it has not been processed through the entire standards-making procedures. It is interim because it is effective only between editions of the standard. A TIA automatically becomes a public input of the proponent for the next edition of the standa

4、rd; as such, it then is subject to all of the procedures of the standards-making process. 1. Revise 11.3.2.2.1 and 11.3.2.2.2* to read as follows: 11.3.2.2.1 The distances in 1, 7, 8, 10, 11, and 12 in Table 11.3.2.2 shall be permitted to be reduced by two-thirds, but to not less than 5 ft (1.5 m),

5、for insulated portions of the system. 11.3.2.2.2* The distances in 1, 7, 8, 10, 11, and 12 in Table 11.3.2.2 shall be permitted to be reduced by the use of fire barrier walls having a fire resistance rating of not less than 2 hours when constructed in accordance with 8.7.2.1 and 11.3.2.2. Issue Date: April 6, 2016 Effective Date: April 26, 2016 (Note: For further information on NFPA Codes and Standards, please see www.nfpa.org/codelist) Copyright 2016 All Rights Reserve NATIONAL FIRE PROTECTION ASSOCIATION

展开阅读全文
相关资源
猜你喜欢
  • GOST 20163-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 1600x1200 mm for moulding foundry machines with turn of half mould without s.pdf GOST 20163-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 1600x1200 mm for moulding foundry machines with turn of half mould without s.pdf
  • GOST 20164-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2000x1600 mm for moulding foundry machines with turn of half mould without s.pdf GOST 20164-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2000x1600 mm for moulding foundry machines with turn of half mould without s.pdf
  • GOST 20165-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2600x1600 mm for moulding foundry machines with turn of half mould without s.pdf GOST 20165-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2600x1600 mm for moulding foundry machines with turn of half mould without s.pdf
  • GOST 20166-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2500x2000 mm for moulding foundry machines with turn of half mould without s.pdf GOST 20166-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2500x2000 mm for moulding foundry machines with turn of half mould without s.pdf
  • GOST 20167-1974 Deep changeable wooden inserts by length from 406 to 806 mm width from 306 to 706 mm for pattern plates Design and dimensions《模板用长度406~806mm,铸宽度306~706mm可换厚木垫 结构及尺寸.pdf GOST 20167-1974 Deep changeable wooden inserts by length from 406 to 806 mm width from 306 to 706 mm for pattern plates Design and dimensions《模板用长度406~806mm,铸宽度306~706mm可换厚木垫 结构及尺寸.pdf
  • GOST 20168-1974 Changeable wooden inserts by length from 1006 to 2006 mm width from 806 to 1606 mm for pattern plates Design and dimensions《模板用长度406~806mm,宽度306~706mm可换厚木垫 结构及尺寸》.pdf GOST 20168-1974 Changeable wooden inserts by length from 1006 to 2006 mm width from 806 to 1606 mm for pattern plates Design and dimensions《模板用长度406~806mm,宽度306~706mm可换厚木垫 结构及尺寸》.pdf
  • GOST 20169-1974 Changeable wooden inserts by length from 1006 to 1206 mm width from 806 to 1006 mm for pattern plates Disign and dimensions《模板用长度1006~1206mm,宽度806~1006mm可换木垫 结构及尺寸》.pdf GOST 20169-1974 Changeable wooden inserts by length from 1006 to 1206 mm width from 806 to 1006 mm for pattern plates Disign and dimensions《模板用长度1006~1206mm,宽度806~1006mm可换木垫 结构及尺寸》.pdf
  • GOST 20170-1974 Changeable wooden inserts by length from 2506 to 2606 mm width from 1606 to 2006 mm for pattern plates Design and dimensions《模板用长度2506~2606mm,宽度1606~2006mm可换木垫 结构及尺.pdf GOST 20170-1974 Changeable wooden inserts by length from 2506 to 2606 mm width from 1606 to 2006 mm for pattern plates Design and dimensions《模板用长度2506~2606mm,宽度1606~2006mm可换木垫 结构及尺.pdf
  • GOST 20171-1974 Changeable wooden inserts by length 1006 mm width 606 mm for pattern plates Design and dimensions《模板用长度1006mm,铸宽度606mm可换木垫 结构及尺寸》.pdf GOST 20171-1974 Changeable wooden inserts by length 1006 mm width 606 mm for pattern plates Design and dimensions《模板用长度1006mm,铸宽度606mm可换木垫 结构及尺寸》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1