1、67 NFPA Guide on Explosion Protection for Gaseous Mixtures in Pipe Systems 2016 ORDER T o order or for more details on other NFPA products or seminars, call 1-800-344-3555. For orders outside the U.S., call 617-770-3000. VISIT our online catalog at catalog.nfpa.org.IMPORTANT NOTICES AND DISCLAIMERS
2、CONCERNING NFPA DOCUMENTS NOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA DOCUMENTS NFPA codes, standards, recommended practices, and guides (“NFPA Standards”), of which the document contained herein is one, are developed through a consensus standards development process approved by th
3、e American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to achieve consensus on re and other safety issues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does
4、not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in NFPA Standards. The NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensator
5、y, directly or indirectly resulting from the publication, use of, or reliance on NFPA Standards. The NFPA also makes no guaranty or warranty as to the accuracy or completeness of any information published herein. In issuing and making NFPA Standards available, the NFPA is not undertaking to render p
6、rofessional or other services for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent profe
7、ssional in determining the exercise of reasonable care in any given circumstances. The NFPA has no power, nor does it undertake, to police or enforce compliance with the contents of NFPA Standards. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance w
8、ith this document. Any certication or other statement of compliance with the requirements of this document shall not be attributable to the NFPA and is solely the responsibility of the certier or maker of the statement. REMINDER: UPDATING OF NFPA STANDARDS Users of NFPA codes, standards, recommended
9、 practices, and guides (“NFPA Standards”) should be aware that NFPA Standards may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any T
10、entative Interim Amendment and any Errata then in effect. In order to determine whether an NFPA Standard has been amended through the issuance of Tentative Interim Amendments or corrected by Errata, visit the Document Information Pages on NFPAs website. The Document Information Pages provide up-to-d
11、ate, document specic information including any issued Tentative Interim Amendments and Errata. To access the Document Information Page for a specic NFPA Standard, go to http:/ www.nfpa.org/docinfo to choose from the list of NFPA Standards or use the search feature on the right to select the NFPA Sta
12、ndard number (e.g., NFPA 101). The Document Information page includes postings of all existing Tentative Interim Amendments and Errata. It also includes the option to register for an “Alert” feature to receive an automatic email notication when new updates and other information are posted regarding
13、the document. ISBN: 978-145591301-5 (Print) ISBN: 978-145591324-4 (PDF)IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS ADDITIONAL NOTICES AND DISCLAIMERS Updating of NFPA Standards Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that t
14、hese documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any
15、 Tentative Interim Amendments and any Errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of Tentative Interim Amendments or corrected through the issuance of Errata, consult appropriate NFPA publications s
16、uch as the National Fire Codes Subscription Service, visit the NFPA website at www.nfpa.org, or contact the NFPA at the address listed below. Interpretations of NFPA Standards A statement, written or oral, that is not processed in accordance with Section 6 of the Regulations Governing the Developmen
17、t of NFPA Standards shall not be considered the ofcial position of NFPA or any of its Committees and shall not be considered to be, nor be relied upon as, a Formal Interpretation. Patents The NFPA does not take any position with respect to the validity of any patent rights referenced in, related to,
18、 or asserted in connection with an NFPA Standard. The users of NFPA Standards bear the sole responsibility for determining the validity of any such patent rights, as well as the risk of infringement of such rights, and the NFPA disclaims liability for the infringement of any patent resulting from th
19、e use of or reliance on NFPA Standards. NFPA adheres to the policy of the American National Standards Institute (ANSI) regarding the inclusion of patents in American National Standards (“the ANSI Patent Policy”), and hereby gives the following notice pursuant to that policy: NOTICE: The users attent
20、ion is called to the possibility that compliance with an NFPA Standard may require use of an invention covered by patent rights. NFPA takes no position as to the validity of any such patent rights or as to whether such patent rights constitute or include essential patent claims under the ANSI Patent
21、 Policy. If, in connection with the ANSI Patent Policy, a patent holder has led a statement of willingness to grant licenses under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such a license, copies of such led statements can be obtained, on
22、request, from NFPA. For further information, contact the NFPA at the address listed below. Law and Regulations Users of NFPA Standards should consult applicable federal, state, and local laws and regulations. NFPA does not, by the publication of its codes, standards, recommended practices, and guide
23、s, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights NFPA Standards are copyrighted. They are made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regu
24、lations, and use in private self-regulation, standardization, and the promotion of safe practices and methods. By making these documents available for use and adoption by public authorities and private users, the NFPA does not waive any rights in copyright to these documents. Use of NFPA Standards f
25、or regulatory purposes should be accomplished through adoption by reference. The term “adoption by reference” means the citing of title, edition, and publishing information only. Any deletions, additions, and changes desired by the adopting authority should be noted separately in the adopting instru
26、ment. In order to assist NFPA in following the uses made of its documents, adopting authorities are requested to notify the NFPA (Attention: Secretary, Standards Council) in writing of such use. For technical assistance and questions concerning adoption of NFPA Standards, contact NFPA at the address
27、 below. For Further Information All questions or other communications relating to NFPA Standards and all requests for information on NFPA procedures governing its codes and standards development process, including information on the procedures for requesting Formal Interpretations, for proposing Ten
28、tative Interim Amendments, and for proposing revisions to NFPA standards during regular revision cycles, should be sent to NFPA headquarters, addressed to the attention of the Secretary, Standards Council, NFPA, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101; email: stds_adminnfpa.org For
29、 more information about NFPA, visit the NFPA website at www.nfpa.org. All NFPA codes and standards can be viewed at no cost at www.nfpa.org/freeaccess.67-1 NFPA and National Fire Protection Association are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts 02169
30、. Copyright 2015 National Fire Protection Association . All Rights Reserved. NFPA 67 Guide on Explosion Protection for Gaseous Mixtures in Pipe Systems 2016 Edition This edition of NFPA 67, Guide on Explosion Protection for Gaseous Mixtures in Pipe Systems, was prepared by the Committee on Explosion
31、 Protection Systems. It was issued by the Standards Council on November 14, 2015, with an effective date of December 4, 2015, and supersedes all previous editions. This edition of NFPA 67 was approved as an American National Standard on December 4, 2015. Origin and Development of NFPA 67 In 1965, an
32、 NFPA Committee was appointed to develop standards for explosion protection systems. The standards were to include information on explosion prevention and mitigation in vessels, ducts, and buildings, focusing primarily on deagrations. During a meeting in 1997, the committee rst considered the subjec
33、t of protection against detonations in manifold pipe networks out of concern for the proliferation of vapor recovery systems at ammable liquid transfer stations. In 1999, the Standards Council approved the creation of a new document to address this issue, and the rst draft of NFPA 67 was presented i
34、n 2011. Following a period of public review and comment, NFPA 67, Guide on Explosion Protection for Gaseous Mixtures in Pipe Systems, was issued in 2013. The 2016 edition expands the section on detonation forces on pipes, provides additional guidance on the proper application of detonation arresters
35、, and provides references to address the design of piping systems that are outside the scope of the guide.EXPLOSION PROTECTION FOR GASEOUS MIXTURES IN PIPE SYSTEMS 67-2 2016 Edition Technical Committee on Explosion Protection Systems Larry D. Floyd, Chair BASF, AL U Luke S. Morrison, Secretary Profe
36、ssional Loss Control Inc., Canada SE Venkateswara Sarma Bhamidipati, Powder Process Solutions, MN IM Martin P. Clouthier, Clouthier Risk Engineering, Canada SE Michael Davies, PROTEGO, Germany M Alexi I. Dimopoulos, ExxonMobil Corporation, VA U Henry L. Febo, Jr., FM Global, MA I Robert J. Feldkamp,
37、 Nordson Corporation, OH M Joseph P. Gillis, Westboro, MA SE Dan A. Guaricci, ATEX Explosion Protection, L.P., FL M Michael D. Hard, Hard Fire Suppression Systems, Inc., OH IM Rep. Fire Suppression Systems Association David D. Herrmann, E. I. DuPont de Nemours & Company, DE U Alfonso F. Ibarreta, Ex
38、ponent, Inc., MA SE Eric R. Johnson, Savannah River Nuclear Solutions, LLC, SC U David C. Kirby, Baker Engineering & Risk Consultants, Inc., WV SE Steven A. McCoy, Ingredion, IN U Rep. NFPA Industrial Fire Protection Section James O. Paavola, DTE Energy/Detroit Edison Company, MI U Stefan Penno, Rem
39、be GmbH Safety & Control, Germany M Samuel A. Rodgers, Honeywell, Inc., VA U Mitchel L. Rooker, BS&B Safety Systems, LLC, OK M Cleveland B. Skinker, Bechtel Power Corporation, MD SE Bill Stevenson, CV Technology, Inc., FL M David R. Stottmann, ST Storage, KS M Stephen M. Stuart, Hylant Group, MI I J
40、rme R. Taveau, Fike Corporation, MO M David E. Trull, XL Global Asset Protection Services, WA I Erdem A. Ural, Loss Prevention Science & Technologies, Inc., MA SE Robert G. Zalosh, Firexplo, MA SE Alternates Geof Brazier, BS&B Safety Systems, LLC, OK M (Alt. to Mitchel L. Rooker) Randal R. Davis, IE
41、P Technologies, MA M (Voting Alt. to IEP Technologies) Todd A. Dillon, XL Global Asset Protection Services, OH I (Alt. to David E. Trull) Thomas Heidermann, Braunschweiger Flammenlter G, Germany M (Alt. to Michael Davies) Kirk W. Humbrecht, Phoenix Fire Systems, Inc., IL IM (Alt. to Michael D. Hard)
42、 Edward L. Jones, Nordson Corporation, OH M (Alt. to Robert J. Feldkamp) Jason Krbec, CV Technology, Inc., FL M (Alt. to Bill Stevenson) John A. LeBlanc, FM Global, MA I (Alt. to Henry L. Febo, Jr.) Gerd Ph. Mayer, Rembe, Inc., NC M (Alt. to Stefan Penno) Keith McGuire, CST Storage, KS M (Alt. to Da
43、vid R. Stottmann) Timothy J. Myers, Exponent, Inc., MA SE (Alt. to Alfonso F. Ibarreta) Thomas C. Scherpa, The DuPont Company, Inc., NH U (Alt. to David D. Herrmann) Jef Snoeys, Fike Corporation, Belgium M (Alt. to Jrme R. Taveau) James Kelly Thomas, Baker Engineering & Risk Consultants, Inc., TX SE
44、 (Alt. to David C. Kirby) William B. Till, Jr., Savannah River Nuclear Solutions, LLC, SC U (Alt. to Eric R. Johnson) Nonvoting Franz Alfert, Inburex Consulting, Germany SE Laurence G. Britton, Process Safety Consultant, WV SE Vladimir Molkov, University of Ulster, Northern Ireland, UK SE Barry Chas
45、e, NFPA Staff Liaison This list represents the membership at the time the Committee was balloted on the nal text of this edition. Since that time, changes in the membership may have occurred. A key to classications is found at the back of the document. NOTE: Membership on a committee shall not in an
46、d of itself constitute an endorsement of the Association or any document developed by the committee on which the member serves. Committee Scope: This Committee shall have primary responsibility for documents on explosion protection systems for all types of equipment and for buildings, except pressur
47、e venting devices designed to protect against overpressure of vessels such as those containing ammable liquids, liqueed gases, and compressed gases under re exposure conditions, as now covered in existing NFPA standards.CONTENTS 67-3 2016 Edition Contents Chapter 1 Administration 67 4 1.1 Scope. . 6
48、7 4 1.2 Purpose. . 67 4 1.3 Piping Installation and Maintenance. . 67 4 1.4 Applications. 67 4 Chapter 2 Referenced Publications 67 4 2.1 General. . 67 4 2.2 NFPA Publications. . 67 4 2.3 Other Publications. . 67 4 2.4 References for Extracts in Advisory Sections. 67 6 Chapter 3 Denitions 67 6 3.1 G
49、eneral. . 67 6 3.2 NFPA Ofcial Denitions. 67 6 3.3 General Denitions. 67 6 Chapter 4 Fundamentals of Deagrations . 67 7 4.1 General. . 67 7 4.2 Flammable Limits. . 67 8 4.3 Burning Velocity. . 67 8 4.4 Flame Speed. . 67 8 4.5 Mixtures. 67 8 Chapter 5 Principles of Detonations 67 9 5.1 Properties. . 67 9 5.2 Detonation Cells and Mixture Composition Limits. 67 9 5.3 Chapman-Jouguet (CJ) Detonations. 67 10 5.4 Detonation Development from
