1、 ERRATA NFPA 70E Standard for Electrical Safety in the Workplace2015 Edition Reference: 110.2(C)(2)(c), 130.7(C)(15)(A), (B) and Table Notes, Table 130.7(C)(16), and Table H.3(b) Errata No: 70E-15-1 The Committee on Electrical Safety in the Workplace notes the following errors in the 2015 edition of
2、 NFPA 70E, Standard for Electrical Safety in the Workplace. 1. Revise 110.2(C)(2)(c) to read as follows: (c) Employees responsible for responding to medical emergencies shall be trained in the use of an automated external defibrilator defibrillator (AED) if an employers emergency response plan inclu
3、des the use of this device. Refresher training shall occur annually. 2. In the title of 130.7(C)(15)(A), add the closing bracket to A. 3. In the third sentence of 130.7(C)(15)(A), “fault clearing” should not be hyphenated. 4. On page 70E-33 Move the second set of Informational Notes after Table 130.
4、7(C)(15)(B). 5. In Table 130.7(C)(16) in PPE Categories 3 and 4, Note 1 following Arc-rated gloves should be Note 3. To read as follows: Arc-rated gloves (see Note 3) 6. In Table H.3(b) insert a horizontal line in the first column above “12 cal/cm2”. 7. In Table H.3(b) insert a horizontal line that
5、crosses both columns above the last occurrence of “Other PPE” in column one and “Hard hat” in column two. Issue Date: March 10, 2015 (Note: Electronic products and pamphlet reprints may have this errata incorporated. For current information about the NFPA Codes and Standards, including this errata, please see www.nfpa.org/codelist) Copyright 2015 All Rights Reserved NATIONAL FIRE PROTECTION ASSOCIATION
