NORDEST NT FIRE 023-1986 《灭火泡沫浓缩液 性能》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 885-1-1981 Side and face milling cutters dimensions《三面刃铣刀 尺寸》.pdf

DIN 885-2-1990 Side milling cutters technical delivery conditions《侧刃铣刀 交货技术条件》.pdf

DIN 8869-1964 Machines for processing paper long machine knives for paper cutting machines《纸张加工机器 切纸机用长切纸刀》.pdf

DIN 8901-2002 Refrigerating systems and heat pumps - Protection of soil ground and surface water - Safety and environmental requirements and testing《制冷系统和加热泵 土壤、土地和地表水的保护 安全性和环境要求与.pdf

DIN 8902-1996 Pressure resistant circular sight glasses of soda-lime-glass without limitation in the range of low temperature《无低温范围限制的耐压氧化钠石灰玻璃制圆形视孔玻璃板》.pdf

DIN 8903-1996 Pressure resistant oblong sight glasses of soda-lime-glass without limitation in the range of low temperature《无低温范围限制的耐压氧化钠石灰玻璃制长形视孔玻璃板》.pdf

DIN 8905-1-1983 Tubes for refrigerating systems with hermetic and semi-hermetic compressors outside diameter up to 54 mm technical delivery conditions《带密封和半密封压缩机的制冷设备用管道 外径54mm以下 交.pdf

DIN 8905-3-1983 Tubes for refrigerating systems with hermetic and semi-hermetic compressors additional technical delivery conditions for capillary restrictor tubes《带密封和半密封压缩机的制冷系统用.pdf

DIN 8906-1990 PN 40 flared flange solderless compression couplings for use in refrigerating systems《制冷系统用40公称压力扩口法兰的非钎焊接压紧管接头》.pdf