NORVEN 55-66-1964 《布料切面或者卷筒部件重量的测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 24342-1980 Units of portable multi-impressions press moulds for manufacturing rubber-fabric chevron seals Design and dimensions《人字形橡胶夹布密封垫生产用多位可卸压模部件 结构及尺寸》.pdf

GOST 24343-1980 Portable single-impression press moulds for manufacturing rubber-fabric chevron callars Design and dimensions《人字形橡胶夹布皮碗制造用单位可卸压模 结构及尺寸》.pdf

GOST 24344-1980 Portable single-impression press moulds for manufacturing rubber-fabric locking rings Design and dimensions《橡胶夹布压圈制造用单位可卸压模 结构及尺寸》.pdf

GOST 24345-1980 Portable single-impression press-moulds for manufacturing rubber-fabric carrier rings Design and dimensions《橡胶夹布支承环制造用单位可卸压模 结构及尺寸》.pdf

GOST 24346-1980 Vibration Terms and definitions《振动 术语与定义》.pdf

GOST 24347-1980 Vibration Designations and units of quantities《振动 符号和量值单位》.pdf

GOST 24348-1980 City buses and coaches Colour diagrams General technical requirements《市区公共汽车和长途汽车 彩色示意图》.pdf

GOST 24350-1988 Foot controls of passenger cars Location General technical requirements and test methods《轻型汽车脚踏操纵机构 配置 一般技术要求和试验方法》.pdf

GOST 24351-1980 Three- and two-jaw lathe self-centring chucks with wedge and lever-type clamps Basic dimensions《车床用自动定心三爪和二爪楔形卡盘及杠杆式楔形卡盘 基本尺寸》.pdf