NS 1731-1974 Screw-down stop valves copper alloy - Flanged ends - Angle pattern.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6065-2011(2015) 2506 Standard Practice for Handling Transportation and Storage of HFC-227ea 1 1 1 2 3 3 3-Heptafluoropropane (CF3CHFCF3)《HFC-227ea 1 1 1 2 3 3 3-七氟丙烷 (CF3CHFC.pdf

ASTM D6066-1996(2004) Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential《液化潜能的评价用砂的常规耐穿透性测定的标准操作规程》.pdf

ASTM D6066-2011 8750 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential 《液化潜能的评价用砂的常规耐穿透性测定的标准操作规程》.pdf

ASTM D6067 D6067M-2017 red 0000 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conducti.pdf

ASTM D6067-1996(2003) Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization《环境定位特性用电子锥形透度计使用的标准指南》.pdf

ASTM D6067-2010 9375 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization《环境厂址表征用电子锥形透度计的标准使用指南》.pdf

ASTM D6068-1996(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials《测定塑料材料J-R曲线的标准试验方法》.pdf

ASTM D6068-2010 2500 Standard Test Method for Determining J-R Curves of Plastic Materials《塑料材料J-R曲线测定的标准试验方法》.pdf

ASTM D6070-2002 Standard Test Methods for Physical Properties of Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable《预组装的电线和电缆用光壁可盘绕的聚乙烯(PE)管道物理特性.pdf