NS 1770-1974 Welding neck flanges - Nominal pressure PN 320.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSF-M3G39-B-2005 TAPE REINFORCED POLYESTER COMPOSITE FILM PRESSURE SENSITIVE THERMOSETTING ADHESIVE ELECTRICAL TO BE USED WITH FORD WSS-M99P1111-A 《电气用带压敏热固胶粘剂的增强聚酯复合薄膜式胶带 .pdf

FORD WSF-M3L72-A2-2003 EPOXY POWDER ELECTRICAL INSULATION ELECTROSTATIC FLUIDIZED BED APLICATION FUEL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐燃料腐蚀的静电流化床用途用电绝缘环氧树脂粉末 与标准F.pdf

FORD WSF-M3L77-B-2003 EPOXY RESIN POTTING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《灌封胶用环氧树脂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSF-M4D556-A2-2010 POLYPROPYLENE (PP) COPOLYMER 22% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《22%矿物材料填充的聚丙烯（PP）共聚物成型料 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD WSF-M4D600-A-2010 AROMATIC POLYESTER (ARP) 30 % GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强芳香聚酯(ARP) 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSF-M4D601-A-2010 AROMATIC POLYESTER (ARP) 50 % GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《50%玻璃纤维增强芳香聚酯(ARP) 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSF-M4D613-A-1988 POLYAMIDE (PA) 11 MOLDING COMPOUND (REPLACES ESK-M4D468-A)《聚酰胺11成型料 替代ESK-M4D468-A》.pdf

FORD WSF-M4D618-A-2011 ACETAL (POM) COPOLYMER MODIFIED HIGH IMPACT GRADE TO BE USED WITH FORD WSS-M99P1111-A 《改良的高抗冲级乙缩醛(POM)共聚物 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSF-M4D620-A-2011 POLYETHYLENE TEREPHTHALATE (PET) 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯对苯二甲酸脂(PET) 40%玻璃纤维 矿物增强模塑材料 .pdf