NS 2597-1967 Shipdrawings - Special statements.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D647-A-2013 POLYAMIDE (PA) 66 MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D648-A-2014 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D648-A2-2006 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用聚酰胺66（PA 66）受热稳定的成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D648-A3-2015 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D649-A-2008 POLYETHYLENE (PE) FOAM CHEMICALLY CROSSLINKED CLOSED CELL 30 kg m3 TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯(PE)泡沫化学交联密闭槽 30 kg m ( 供与FORD WSS-M99P1111-A一起使.pdf

FORD WSK-M4D651-A2-2009 POLYPROPYLENE (PP) COPOLYMER 10 % MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《10%矿物材料填充的聚丙烯（PP）共聚物成型料 与标准FORD WSS-M99P1111-A一起使用.pdf

FORD WSK-M4D653-A-2005 POLYAMIDE (PA) 66 HEAT STABILIZED 20% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用受热稳定、20%玻璃纤维增强的聚酰胺66成型料 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD WSK-M4D654-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 40% GLASS SPHERE REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D654-A2)《40%玻璃珠增强的受热稳定的聚酰胺66 与标准FORD WSS-M99P.pdf

FORD WSK-M4D654-A2-2012 POLYAMIDE 66 (PA66) HEAT STABILIZED 40% GLASS SPHERE REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf