NS 3656-1993 Concrete testing - Rate of reaction as a function of temperature.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NBN EN 679-1994 8125 Determination of the compressive strength of autoclaved aerated concrete《热压处理过的加气混凝土的抗压强度的测定》.pdf

NBN EN 680-1994 5625 Determination of the drying shrinkage of autoclaved aerated concrete《热压处理过的加气混凝土的干燥收缩的测定》.pdf

NBN EN 702-1995 4375 Protective clothing - Protection against heat and flame - Test method Determination of the contact heat transmission through protective clothing or its materi.pdf

NBN EN 704-1994 8750 Principles and methods of terminology《术语和一般原则》.pdf

NBN EN 705-1994 1875 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes and fittings Methods for regression analyses and their use《塑料管道系统 玻璃纤维增强热固塑料管和管件 回归.pdf

NBN EN 712-1994 5625 Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant .pdf

NBN EN 713-1994 6875 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblie.pdf

NBN EN 714-1994 0000 Thermoplastics piping systems Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings Test method for leaktightnet e.pdf

NBN EN 715-1994 8750 Thermoplastics piping systems - End-load bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water.pdf