NS 5815-2006 Risk assessment of construction work.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 2698-1995 Diesel engines - Clamp-mounted fuel injectors types 7 and 28 identical with ISO 2698 1993《柴油发动机 夹紧式燃油喷嘴 7 型和 28 型 等同采用 ISO 2698 1993》.pdf

DIN ISO 2699-2002 Diesel engines - Flange-mounted fuel injectors size S - Types 2 3 4 5 and 6 (ISO 2699 1994)《柴油发动机 法兰安装喷咀 S 规格 型号2、3、4、5和6 (ISO 2699 1994)》.pdf

DIN ISO 272-1979 Fasteners Width across Flats for Hexagon Products《紧固件 六角制件的对边宽度》.pdf

DIN ISO 2747-1999 Vitreous and porcelain enamels - Enamelled cooking utensils - Determination of resistance to thermal shock (ISO 2747 1998)《瓷釉和搪瓷 搪瓷烹调器具 耐热冲击性能的测定》.pdf

DIN ISO 27588-2014 Rubber vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588 2012)《硫化或热塑性橡胶 用非常低橡胶硬度(VLRH).pdf

DIN ISO 2768-1-1991 General tolerances tolerances for linear and angular dimensions without individual tolerance indications identical with ISO 2768-1 1989《通用公差 第1部分 不逐一标注公差的线性尺寸和角.pdf

DIN ISO 2768-2-1991 General tolerances geometrical tolerances for features without individual tolerances indications identical with ISO 2768-2 1989《通用公差 第2部分 未标注专用公差的功能部件用形位公差 等同采用.pdf

DIN ISO 27955-2012 Road vehicles - Securing of cargo in passenger cars station wagons and multi-purpose vehicles - Requirements and test methods (ISO 27955 2010)《道路车辆 轿车 旅行车 多用途汽车货.pdf

DIN ISO 27956-2011 Road vehicles - Securing of cargo in delivery vans - Requirements and test methods (ISO 27956 2009)《公路车辆 厢式货车的货物固定要求和试验方法(ISO 27956-2009)》.pdf