NS 6239-1982 Marine industry - Air sounding and filling pipes - Sleeves.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 3452-2-2013 en Non-destructive testing - Penetrant testing - Part 2 Testing of penetrant materials《无损检测 渗透测试 第2部分 渗透性材料测试》.pdf

EN ISO 3452-3-2013 en Non-destructive testing - Penetrant testing - Part 3 Reference test blocks《无损检测 渗透测试 第3部分 参考试块》.pdf

EN ISO 3452-4-1998 en Non-Destructive Testing - Penetrant Testing - Part 4 Equipment《无损试验 渗透试验 第4部分 设备ISO 3452-4-1998》.pdf

EN ISO 3452-5-2008 en Non-destructive testing - Penetrant testing - Part 5 Penetrant testing at temperatures higher than 50 degrees C《无损检验渗透试验 第5部分 温度高于50℃条件下的渗透测试》.pdf

EN ISO 3452-6-2008 en Non-destructive testing - Penetrant testing - Part 6 Penetrant testing at temperatures lower than 10 degrees C《无损检验 渗透测试 第6部分 温度低于10℃的渗透测试》.pdf

EN ISO 3457-2008 en Earth-moving machinery - Guards - Definitions and requirements《土方机械 挡板 定义和要求》.pdf

EN ISO 3458-2015 en Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure《塑料管道系统 管件和聚烯烃压力管的机械连接 内压.pdf

EN ISO 3459-2015 en Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure《塑料管道系统 管件和聚烯烃压力管的机械连接 负压密.pdf

EN ISO 3471-2008 en Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements《土方机械 防倾翻结构 实验室试验和性能要求［代替 CEN EN 13510］》.pdf