NS 7322-1982 Valves - Spheroidal graphite cast iron butterfly valves wafer type - DN 50 to DN 600 - Nominal pressure PN 16 - Soft seal.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 20473-1-1988 Switches for simple underground track points with loose heel switch 50 m radius 1 7 inclination 600 mm gauge《第1部分 半径为 50 米、斜度 1 7 、轨距 600 毫米的带后部非固定式开关的简易地铁轨道用开关》.pdf

DIN 20473-2-1988 Switches for simple underground track points with spring switch blade 50 m radius 1 7 inclination 600 mm gauge《第2部分 半径为 50 米、斜度 1 7 、轨距 600 毫米的带弹性开关片的简易地铁轨道用开关》.pdf

DIN 20474-1988 Crossings for simple underground track points 50 m radius 1 7 inclination 600 mm gauge《简易地铁轨道道岔交叉口 半径50m 斜度1 7 轨距600mm》.pdf

DIN 20475-1988 Check rail device for simple underground track points 50 m radius 1 7 inclination 600 mm gauge《简易的地下矿道交叉点的道轨试验装置 半径50m 斜度1 7 轨距 600mm》.pdf

DIN 20478-1988 Simple crossovers for underground tracks 50 m radius 1 7 inclination geometric dimensions《简易的地下矿道交叉点 半径50m 斜度1 7 几何尺寸》.pdf

DIN 20499-2007 Rail haulage roads in mines - General rules《矿山的轨道运输道路 一般规则》.pdf

DIN 205-1996 Hand reamers for metric tapers《米制锥孔手铰刀》.pdf

DIN 20500-2015 Underground mine railways - Track gauges and rails - Standard types and selection《地下采矿铁路 轨距和轨道 标准类型和选择》.pdf

DIN 20501-2015 Underground mine railways - But strap Fl 30 for rail 30E1《地下采矿铁路 30E1钢轨的FI30对接搭板》.pdf