NS-ISO 3443-1-1994 Tolerances for building - Part 1 Basic principles for evaluation and specification.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS9035 REV C (1)-2005 BOLT-MACHINE STEEL 12 POINT HEAD HEAT RESISTANT STEEL 3125-24 NS《0 3125-24 NS型12点抗热钢锚杆机》.pdf

DLA MS9036 REV C VALID NOTICE 1-2013 Bolt-Machine 12 Point Head Heat Resistant Steel 375-24 NS.pdf

DLA MS9036 REV C-2008 BOLT-MACHINE 12 POINT HEAD HEAT RESISTANT STEEL 375-24 NS《375-24 NS耐热钢13角头螺栓机》.pdf

DLA MS9060 REV C VALID NOTICE 2-2013 Bolt Machine-Double Hexagon Extended Washer Head Corrosion and Heat Resistant Steel Drilled 190-32 NS.pdf

DLA MS9060 REV C-2005 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD CORROSION AND HEAT RESISTANT STEEL DRILLED 190-32 NS《0 190-32 NS型防腐蚀和耐热钢垫圈顶部加长双重六边形锚杆机》.pdf

DLA MS9062 REV C (1)-2002 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD CORROSION AND HEAT RESISTANT STEEL DRILLED 3125-24 NS《0 3125-24 NS钻过孔的腐蚀和抗热钢外清洗头 双六边形机器螺栓》.pdf

DLA MS9062 REV C VALID NOTICE 1-2007 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD CORROSION AND HEAT RESISTANT STEEL DRILLED 3125-24 NS《0 3125-24 NS钻过孔的腐蚀和抗热钢外清洗头 双六边形机器螺栓》.pdf

DLA MS9062 REV C-1994 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD CORROSION AND HEAT RESISTANT STEEL DRILLED 3125-24 NS《0 3125-24 NS钻过孔的腐蚀和抗热钢外清洗头 双六边形机器螺栓》.pdf

DLA MS9063 REV B (1)-1996 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD CORROSION AND HEAT RESISTANT STEEL DRILLED 375-24 NS《0 190-32 NS型防腐蚀和耐热钢垫圈顶部加长双重六边形锚杆机》.pdf