NS-ISO 8738-1988 Plain washers for clevis pins - Product grade A (ISO 8738 1986).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 8349-1988 Files and rasps numbers of cuts《锉和粗锉 锉齿数量》.pdf

DIN 835-2010 Studs - Metal end 2 d《双头螺栓 旋入端（约）2d》.pdf

DIN 8350-1995 Scrapers《刮刀》.pdf

DIN 837-2007 Box wrenches double head for subordinate applications - Dimensions and test torques《带次级用双头的梅花扳手 尺寸和检验扭矩》.pdf

DIN 8374-2006 Subland twist drills with parallel shank for clearance holes and countersinks for countersunk head screws《沉头螺钉安装沉孔和通孔用的带平行钻柄的多刃阶梯麻花钻》.pdf

DIN 8375 Berichtigung 1-2008 de 6463 Subland twist drills with Morse taper shank for clearance holes and countersinks for countersunk head screws Corrigenda to DIN 8375 2006-11《安装通.pdf

DIN 8375-2006 Subland twist drills with Morse taper shank for clearance holes and countersinks for countersunk head screws《沉头螺钉安装沉孔和通孔用的带莫氏锥柄的多刃阶梯麻花钻》.pdf

DIN 8376-2006 Subland twist drills with parallel shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws《内六角头圆头螺钉和一字槽圆头螺钉安装通孔和沉.pdf

DIN 8377-2006 Subland twist drills with Morse taper shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws《内六角头圆头螺钉和一字槽圆头螺钉安装通.pdf