ONORM A 1013-1981 Form for short messages《短信息格式》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST ISO 1167-1-2013 Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1 General method《流体输送用热塑性塑料.pdf

GOST ISO 1167-2-2013 Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 2 Preparation of pipe test .pdf

GOST ISO 1167-3-2013 Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3 Preparation of components.pdf

GOST ISO 1167-4-2013 Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4 Preparation of assemblies.pdf

GOST ISO 11737-1-2012 Sterilization of medical devices Microbiological methods Part 1 Estimation of population of microorganisms on products《医疗器械灭菌 微生物法 第1部分 产品上微生物数量的估计》.pdf

GOST ISO 11737-2-2011 Sterilization of medical devices Microbiological methods Part 2 Tests of sterility performed in the validation of a sterilization process《医疗器械灭菌 微生物法 第2部分 用于验.pdf

GOST ISO 11746-2014 Rice Determination of biometric characteristics of kernels《稻米 谷物生物计量特性的测定》.pdf

GOST ISO 1181-2013 3- 4- and 8-strand Manila and sisal fibre ropes General specifications《3 4以及8股马尼拉和剑麻纤维绳索 通用规格》.pdf

GOST ISO 11817-2014 Roasted ground coffee Determination of moisture content Karl Fischer method (reference method)《经烘焙的研磨咖啡 水分含量的测定 卡尔费瑟方法 (参考方法)》.pdf