ONORM A 6065-2-1992 Technical drawings - Dimensioning for general application - Indication of limits and fits《技术图纸 一般适用尺寸 极限与配合的标注》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WRS-M5H47-A4-2017 LAMINATE POLYESTER NON-WOVEN POLYESTER NON-WOVEN BACKING DINAMICA (MIKO) MICROSUEDE PATTERN 68 IN WIDTH RECYCLED PIR PCR CONTENT TO BE USED WITH FORD WSS-M9.pdf

FORD WRS-M5H50-A20-2018 LAMINATE POLYESTER FABRIC POLYURETHANE FOAM POLYESTER BACKING MOOREA PATTERN PILE WARP KNIT RECYCLED PIR PCR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (.pdf

FORD WRS-M99P42-A1-2013 MOLDING COMPOUND IDENTIFICATION OF RECYCLED CONTENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WRS-M99P42-A2-2011 TEXTILE MATERIALS IDENTIFICATION OF RECYCLED CONTENT TO BE USED WITH FORD WSS-M99P1111-A 《纺织材料 回收物质含量的识别 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WRS-M9H144-A1-2016 SHEETING POLYESTER POLYAMIDE NON WOVEN STITCH BONDED 270 g m2 (8 oz) TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSA-M11A45-A1-2005 SOLDER TIN BASED TO BE USED WITH FORD WSS-M99P1111-A 《锡基焊料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSA-M11A45-A3-2005 SOLDER TIN BASED TO BE USED WITH FORD WSS-M99P1111-A 《锡基焊料 与标准FORD WSS-M99P1111-A一起使用 列于标准WSA-M11A45-A1上》.pdf

FORD WSA-M11P19-C-2013 ADHESION REQUIREMENTS POLYURETHANE FOAM PRESSURE SENSITIVE ADHESIVE HIGH TACK TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSA-M1A297-A1-2014 STEEL - STAINLESS (TITANIUM STABILIZED) TYPE 1 ALUMINUM COATED TO BE USED WITH FORD WSS-M99P1111-A .pdf