ONORM B 2503-1999 Drainage and sewerage Systems - Supplementary guidelines for design construc- tion and testing《排水和污水工程系统 设计，建造和测试的补充准则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD SL7-1988 RAILINGS FOR PORTABLE PLATFORMS《移动式平台用栏杆》.pdf

FORD SQ-M1A9006-A-2010 STEEL TUBE - WELDED NORMALISED AND COLD DRAWN TO BE USED WITH FORD WSS-M99P1111-A 《焊接、正火处理和冷拉钢管 与标准FORD WSS-M99P1111-A一起使用 ［使用 CEN EN 10305-2］》.pdf

FORD SQ-M1A9007-A-2009 STEEL TUBE - WELDED TO BE USED WITH FORD WSS-M99P1111-A 《焊接钢管 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD SQ-M1A9410-A38-2009 STEEL UNALLOYED - INDUCTION HARDENABLE TO BE USED WITH FORD WSS-M99P1111-A 《可感应硬化的非合金钢 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD SQ-M1A9410-A46-2009 STEEL UNALLOYED - INDUCTION HARDENABLE TO BE USED WITH FORD WSS-M99P1111-A 《可感应硬化的非合金钢 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD SQ-M1A9410-A38上》.pdf

FORD SQ-M1A9410-A53-2009 STEEL UNALLOYED - INDUCTION HARDENABLE TO BE USED WITH FORD WSS-M99P1111-A 《可感应硬化的非合金钢 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD SQ-M1A9410-A38上》.pdf

FORD SQ-M1A9440-A28H-2009 STEEL MOLYBDENUM ALLOYED TO BE USED WITH FORD WSS-M99P1111-A 《钼合金钢 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD SQ-M1A9441-A20H-2009 STEEL CHROMIUM-MOLYBDENUM ALLOYED TO BE USED WITH FORD WSS-M99P1111-A 《铬钼合金钢 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD SQ-M1A9451-A20H-2010 STEEL CHROMIUM ALLOYED TO BE USED WITH FORD WSS-M99P1111-A 《铬合金钢 与标准FORD WSS-M99P1111-A一起使用 ［使用 CEN EN 10084］》.pdf