ONORM B 3423-1988 Fibre-cement flat sheets (FZ-GT) requirements testing marking of conformity《纤维水泥平板 要求，测试，合格标识》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS K T3 112-1983 Tile gauges GO and NOTGO for measures over 2 up to and including 8 mm nominal si e《适用于标称直径为2-8毫米（含）的孔洞的测量的过端和不过端量规》.pdf

JUS K T3 113-1983 Tile gauges GO and NOT GO for measures over 12 up to and including 100 mm nominal size《匹配或不匹配公称尺寸在12至100毫米（包括100毫米）之间测量的砖检测仪》.pdf

JUS K T3 120-1983 60 gauging membres for holes from 1 up to and including 50 mm nominal diameter《适用于标称直径在1- 50毫米（含）的孔洞的过端量规》.pdf

JUS K T3 121-1983 NOTGOgauging members for vvholes from 1 to and including 50 mm nominal diameter《适用于标称直径在1- 50毫米（含）的孔洞的不过端量规》.pdf

JUS K T3 122-1983 GO and NO TGO plug gauges for holes from f to and including 50 mm nominal diameter《适用于标称直径在1- 50毫米（含）的孔洞的过端和不过端塞规》.pdf

JUS K T3 123-1983 G0 plug gauges for hofos from 1 to anti inckiding 50 mm nominal aintnater《适用于标称直径为1-50毫米（含）的孔洞的过端塞规》.pdf

JUS K T3 124-1983 NO TGO plug gauges for holes from 1 to and including 50 mm nominal diameter《适用于标称直径在1- 50毫米（含）的孔洞的不过端塞规》.pdf

JUS K T3 130-1983 GO gauging members for holes over 40 up to and inckiding 120 mm nominal diameter《GO 钻孔螺旋塞计量器大于40 到120 毫米包括120毫米 公称口径》.pdf

JUS K T3 131-1983 NOTGO gauging memberes for holes over 40 to 120 mm nominal diameter cylindrical plug gauges《适用于标称直径在40-120毫米之间的孔径的不过端测量的圆柱塞规》.pdf