ONORM B 5350-2000 Door lodks - Upright lever mortice locks - Dimensions and requirements《门锁 插锁和垫片 尺寸和要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2431-2004(2012) Standard Specification for Ring Bearing Inner For Needle Roller Bearing with Thick Outer Ring《内部环状轴承的标准规范 带厚外环的滚针轴承》.pdf

ASTM F2432-2004 Standard Specification for Ice Making Machines Icemaker-Dispensers and Ice Dispensing Equipment《制冰机、制冰机-分配器和冰分配装置的标准规范》.pdf

ASTM F2432-2012 Standard Specification for Ice Making Machines Icemaker-Dispensers and Ice Dispensing Equipment《制冰机 制冰机-分配器和冰分配装置的标准规范》.pdf

ASTM F2433-2005 Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness《测定热塑管壁硬挺度的标准试验方法》.pdf

ASTM F2433-2005(2009) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness《测定热塑管管壁刚度的标准试验方法》.pdf

ASTM F2433-2005(2013) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness《测定标准热塑管壁硬度的试验方法》.pdf

ASTM F2433-2005(2018) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness.pdf

ASTM F2434-2005 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene Alb.pdf

ASTM F2434-2008 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene Alb.pdf