ONORM C 9433 Teil 1-1982 Testing of elastomers determination of ball indentation hardness (IRHD) of soft rubber《弹性纤维测试； 软橡胶球压痕硬度（IRHD）的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HG 21503-1992 钢制固定式薄管板例管换热器.pdf

HG 21503-1992（条文说明） 钢制固定式薄管板例管换热器.pdf

HG 21505-1992（编制说明） 组合式视镜.pdf

HG 21506-1992（编制说明） 补强圈.pdf

HG 2153-1991 水处理剂.聚合硫酸铁.pdf

HG 21532-1995 回转带盖颈对焊法兰手孔.pdf

HG 21541-1992 焊接H型钢标准节点通用图.(一)焊接连接 (二)高强螺栓.pdf

HG 21594-1999（编制说明） 不锈钢人、手孔分类与技术条件.pdf

HG 21596-1999（编制说明） 回转盖不锈钢人孔.pdf