ONORM DIN 267 Teil 6-1978 《机械连接元件 技术供货条件 规格和产品等级 F 的尺寸准确性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7748-2012e1 2500 Standard Test Method for Flexural Rigidity of Geogrids Geotextiles and Related Products《土工隔栅 土工织物和相关产品抗弯刚度的标准试验方法》.pdf

ASTM D7749-2011 3750 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method《热熔增强防渗膜制成接缝完整性抓抢法测定.pdf

ASTM D7749-2011(2018) 8750 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method《用抓斗法测定强化土工膜热熔.pdf

ASTM D7750-2012 2500 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer《使用封装样品流变仪根据动态力学程序测定热固性.pdf

ASTM D7750-2012(2017) 2500 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer《利用封装试样流变仪的动态机械过程.pdf

ASTM D7751-2011 1250 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis《能量弥散X射线荧光分析法测定润滑油添加剂元素的标准试验方法》.pdf

ASTM D7751-2011e1 0980 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis《使用X射线荧光分析法测定润滑油添加剂元素的标准试验方法》.pdf

ASTM D7751-2012 red 7500 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis《用射线荧光光谱仪分析法测定润滑油中添加剂的标准试验方法》.pdf

ASTM D7751-2014 red 5140 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis《采用EDXRF分析测定润滑油中添加元素的标准试验方法》.pdf