ONORM E 1100 Teil 2-1990 Standard voltages nominal voltages for low voltage public electricity supply systems《标准电压 低压公共供电系统的额定电压》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D608-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) 33% GLASS FIBER REINFORCED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《33%玻璃纤维增强的聚对苯二甲酸丁二醇酯(PBT).pdf

FORD WSK-M4D613-A2-2005 POLYAMIDE 11 (PA11) RIGID HEAT STABILISED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的刚性聚酰胺11成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D617-A-2010 POLYETHYLENE TEREPHTHALATE (PET) IMPACT MODIFIED 35% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《35%玻璃纤维增强的聚对苯二甲酸乙二酯(PET)冲.pdf

FORD WSK-M4D618-A2-2011 ACETAL (POM) COPOLYMER MODIFIED HIGH IMPACT GRADE TO BE USED WITH FORD WSS-M99P1111-A 《改良的高抗冲级乙缩醛(POM)共聚物 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D619-A3-2011 POLYPROPYLENE (PP) SHEET 30% CONTINUOUS GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《30%连续玻璃纤维增强聚丙烯(PP)板 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D621-A-2011 POLYVINYL CHLORIDE (PVC) DRY BLEND SLUSH MOULDED SKIN TO BE USED WITH FORD WSS-M99P1111-A 《干混合水泥砂浆成型表皮的聚氯乙烯(PVC) 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D622-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) IMPACT MODIFIED 45 % GLASS FIBRE REINFORCEDMOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《45%玻璃纤维增强的聚对苯二甲酸丁二醇酯(PBT).pdf

FORD WSK-M4D623-A-2011 POLYPHENYLENE ETHER + POLYAMIDE (PPE+PA) BLEND MOLDING COMPOUND IMPACT MODIFIED TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良的聚亚苯基乙醚+聚酰胺(PPE+PA)混合模塑材料 与福特WSS-.pdf

FORD WSK-M4D623-A2-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良的聚亚苯基乙醚+聚酰胺(PPE+PA)模塑材料 与福特WSS-M.pdf